Adjustable Control Arms Jam Nuts
#2
JK Freak
#3
JK Junkie
Thread Starter
Join Date: Mar 2009
Location: Scottsdale, AZ
Posts: 2,368
Likes: 0
Received 0 Likes
on
0 Posts
#4
JK Freak
On the other hand, many will tell you to just put an adjustable wrench on the jam nuts, put on your big girl panties, and go to town. In other words, tighten the bejeezus out of them as best you can.
Trending Topics
#8
JK Junkie
I'll usually use a large pry bar to keep my joints nice and even, not canted on the mount.
Jam the tip of the pry bar in between the joint head and the axle or frame mount. Stays in place and gets tight without swaying the joint.
Maybe it's odd I just use a 20" crescent wrench with the pry bar trick till I scream. I check them all the time, not once loose.
Jam the tip of the pry bar in between the joint head and the axle or frame mount. Stays in place and gets tight without swaying the joint.
Maybe it's odd I just use a 20" crescent wrench with the pry bar trick till I scream. I check them all the time, not once loose.
Last edited by sa29560; 08-18-2016 at 10:40 AM.
#9
Super Moderator
#10
JK Jedi