![]() |
Automatic to Manual transmission swap
Hey guys I have an automatic transmission in my 2007 jeep jk and really want a manual. How difficult and expensive do you guys think this would be to do if i'm currently running a 5 speed auto and want a 6 speed manual?
|
Are you saying you want to rip out the auto and install a manual?
Might be easier to sell yours and buy a manual JK.... |
Originally Posted by rdavi
(Post 3771545)
Are you saying you want to rip out the auto and install a manual?
Might be easier to sell yours and buy a manual JK.... |
Trade in your jeep for the 6 speed and start building your jeep all over, better yet take off all your stuff you've put in your current jeep, bring it back to stock because resale as a stocker your better off anyways, get your new jeep with the manual and put all your aftermarket parts on your new jeep. Problem solved cheaper in the end.
Sent from my iPhone using Tapatalk |
Originally Posted by offthewallsurfer
(Post 3800351)
Trade in your jeep for the 6 speed and start building your jeep all over, better yet take off all your stuff you've put in your current jeep, bring it back to stock because resale as a stocker your better off anyways, get your new jeep with the manual and put all your aftermarket parts on your new jeep. Problem solved cheaper in the end. Sent from my iPhone using Tapatalk
|
yep
same advice I give for engine swaps and auto swaps...
sell it, and buy the one you want. |
a few guys have done it.. seemed to be around 3k to do.. yes programming etc.. addrenline offroad in maryland did one they have some posts about it. or you could contact them.. did seem to be alot of labor involved.
|
Interior Rack
We have the swap parts, for about $1500.00. We have done it many times, the only thing you will need to buy is the wiring from the TIPM to the ABS for a Manuel and a Computer NEW.
Takes about a day to do. |
Originally Posted by JSS
(Post 3800611)
We have the swap parts, for about $1500.00. We have done it many times, the only thing you will need to buy is the wiring from the TIPM to the ABS for a Manuel and a Computer NEW.
Takes about a day to do. |
Originally Posted by Ruby Tuesday
(Post 3800798)
And a tranny
|
| All times are GMT -8. The time now is 03:08 AM. |
© 2026 MH Sub I, LLC dba Internet Brands