Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Doing lift,would it work with these wheels???

Thread Tools
 
Old Apr 13, 2012 | 06:48 AM
  #1  
djcamis's Avatar
Thread Starter
JK Enthusiast
 
Joined: Apr 2012
Posts: 155
Likes: 0
From: Miami,Fl
Default Doing lift,would it work with these wheels???

i want to do the teraflex 2.5in lift with the bilstein shocks. But was reading that wheels should have less than 4.5 backspacing. and theones that i am looking at are 5". would that work??

Thaks!

Last edited by djcamis; Apr 13, 2012 at 06:52 AM.
Reply
Old Apr 13, 2012 | 09:21 AM
  #2  
AirForceMike's Avatar
JK Enthusiast
Veteran: Air Force
 
Joined: Nov 2011
Posts: 176
Likes: 0
From: Sicily, Italy
Post

Originally Posted by djcamis
i want to do the teraflex 2.5in lift with the bilstein shocks. But was reading that wheels should have less than 4.5 backspacing. and theones that i am looking at are 5". would that work??

Thaks!

If you run a wheel with 5" of backspacing, you will more than likely rub when you're at full turn up front. Wayoflife talks about it in this thread.

https://www.jk-forum.com/forums/show...274#post211274

Good call going with Teraflex and Billsteins. They're great companies with great reputations
Reply




All times are GMT -8. The time now is 09:13 AM.