Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Experience with Wheel Spacers

Thread Tools
 
Old Jan 17, 2014 | 04:20 PM
  #21  
Bobby G's Avatar
Thread Starter
JK Enthusiast
 
Joined: Jan 2013
Posts: 277
Likes: 3
From: South Jersey
Default

Originally Posted by LidLess07X
The short answer is there is nothing wrong with using quality spacers when installed properly but there are limitations to everything.

Running 37s and that much backspacing, coupled with spacers, you are just begging for trouble. I would definitely do the steering stops over the spacers. Especially with those heavy Toyos in a 13.50

"Anything worth doing, is worth overdoing" Follow that with your axles, wheels, and tire combination.

Good luck !!
Agreed, thats why on the 29th i go for a regear to 5.13, gussets, synergy sleeve, master rebuild front and rear axle, steering stabilizer….and then the 37s….would never run them any other way….

BTW - thanks all for the feedback…very helpful, don't know what i would do without the helpful forum members….i know what i'd like to do to the internet tough guy forum members….thanks again!
Reply




All times are GMT -8. The time now is 09:22 AM.