|
Painting flowmaster 80 series
Hey, so I just received my flowmaster 80 series, Mendrel-bent elbows, and exhaust tips in the mail. They come chrome but I wanted to paint them black to go with the rest of the theme of my jeep. I was wondering if anyone had any suggestions on what to do or use on them? I painted my stock muffler with high temp paint. Thanks for the suggestions
|
ive painted chrome before. you gotta sand and scuff up the chrome as best you can. use a high temp gray primer. followed by a high temp gloss or flat black. I use a high temp engine block enamel/ gloss. good luck
|
Originally Posted by Theonekyle
(Post 3366879)
ive painted chrome before. you gotta sand and scuff up the chrome as best you can. use a high temp gray primer. followed by a high temp gloss or flat black. I use a high temp engine block enamel/ gloss. good luck
|
Originally Posted by Theonekyle
(Post 3366879)
ive painted chrome before. you gotta sand and scuff up the chrome as best you can. use a high temp gray primer. followed by a high temp gloss or flat black. I use a high temp engine block enamel/ gloss. good luck
Do you have any pics of how yours came out, or anyone else for that matter? how has the paint held up over the months/years |
3 Attachment(s)
I started the priming and painting process today
Attachment 406862 Attachment 406863 Attachment 406864 |
4 Attachment(s)
|
Originally Posted by deaner23
(Post 3372984)
|
Originally Posted by time2eat
(Post 3373573)
Looks good! Have any side shots? Keep us posted on any issues of the paint pealing/rust issues. |
Originally Posted by deaner23
(Post 3373714)
Thanks! Will do, so far so good. Ill take side shots tomorrow morning
|
2 Attachment(s)
Originally Posted by time2eat
(Post 3373573)
Looks good! Have any side shots? Keep us posted on any issues of the paint pealing/rust issues. Attachment 407852 Attachment 407853 |
| All times are GMT -8. The time now is 04:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands