Tailgate plate cover and 3rd Brake like- Combined?
I just got a bumper with a tire carrier and finally got my 35 of the tailgate. I still need to figure out what I am going to do with my 3rd brake light. I'd like to run a tailgate plate, like this one made by Vector Offroad: Vector Offroad
I don't wanna run this and then my cut down 3rd brake light on top. Does anyone make a one piece tailgate cover with a third brake light? |
1 Attachment(s)
|
Thanks for the idea, I'm not doing a rear tire delete, so I still need an elevated 3rd brake light. Sounds like I am out of luck.
|
|
1 Attachment(s)
Originally Posted by HuntNFish
Thanks for the idea, I'm not doing a rear tire delete, so I still need an elevated 3rd brake light. Sounds like I am out of luck.
Attachment 321375 |
1 Attachment(s)
Originally Posted by afpilot82
I used the Teraflex bracket, uses the stock brake light and is adjustable. <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=321375"/> Attachment 321384 |
All times are GMT -8. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands