Hi Guys,

I was hoping someone could give me a definitive YES or NO as to whether the stock TPMS sensors from my 2011 2dr Sport will fit the 17" ProComp 7032 wheels?

Out here in Dubai there isn't a "Discount Tire" I can go to that has done a lot of these.

And I'd prefer not to have to deal with the flashing light or have to buy a ProCal programmer before you guys start all your persuasion tactics.

Thanks in advance

 

i dont have the 7032 but my pro comps have the stock sensors in them

 

I am running Pro Comp Series 8107 (17"x 8").
I have the stock TPMS installed.
No issues.

 

ProComp's here too with no problems.

 

Awesome, thanks for the info, hopefully they don't balls it up...

 

If you don't install the sensors do you just get the "idiot light" or is there an audible signal constantly?

 

What is the audible signal? Is it only at start up or is it a periodic audible signal every few minutes.

 

I can live with that. I may not install the sensors on my new wheels. One of my sensors on my Expedition is acting up. It gives an audible warning every few minutes. I've gotta get that fixed because it's getting irritating.

 

What else can you do with the Pro Cal?

 

hey guy's,
does any one know how much these sensors are costing in the US?
I live in europe and wanted to put the sensors on my procomp wheels, the guy at the dealer told me it will cost 125 dollars per sensor, that is just the part, not with the instalation cost!
so that is 5 x 125 dollar just for the sensors without instalation
I drive now with the warning light on!