Where did you mount your ARB Twin?
#1
JK Enthusiast
Thread Starter
Join Date: May 2011
Location: Southwest PA
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Where did you mount your ARB Twin?
Just picked up an ARB twin compressor and need some mounting ideas. Where is everyone mounting these beasts!? Pics would be helpful also. Looking forward to trying this piece out!
#2
JK Super Freak
I had that same thought when I first saw this compressor.
I know the single can mount under hood.
A lil while back, EVO put a picture on Facebook showcasing the ARB JK with the new ARB rear storage drawers and the twin compressor was mounted on top of the storage box with what looked like a 2-gallon tank next to it.
Subscribed.
I know the single can mount under hood.
A lil while back, EVO put a picture on Facebook showcasing the ARB JK with the new ARB rear storage drawers and the twin compressor was mounted on top of the storage box with what looked like a 2-gallon tank next to it.
Subscribed.
#4
JK Super Freak
Originally Posted by Blade
How about, right above the rear diff. Seems sound and I have seen twin Viairs mounted there, and they are much bigger.
#5
JK Newbie
Join Date: Mar 2009
Location: Victoria, Australia
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I currently run a single ARB under the seat & am confident that the unit will fit there.
Although I have the ARB twin & my project over the winter here will be to mount it right out the back. I have a heap of space since relocating my muffler & I am saving up for a Dominion tub enlargement. The ARB will go in the tub, and I will fit a narrow tank externally, maybe make up a skid, and direct a manifold going into the trunk.
I had an older ARB under the hood, and to be honest, it ain't the best environment for a compressor
Although I have the ARB twin & my project over the winter here will be to mount it right out the back. I have a heap of space since relocating my muffler & I am saving up for a Dominion tub enlargement. The ARB will go in the tub, and I will fit a narrow tank externally, maybe make up a skid, and direct a manifold going into the trunk.
I had an older ARB under the hood, and to be honest, it ain't the best environment for a compressor
Trending Topics
#8
JK Newbie
Join Date: Oct 2011
Location: Arrington, TN
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Will it fit under the pass seat if u have seat heaters? There is a bracket under there for the seat heater and it looks to be a tight fit without the bracket in the way
#10
JK Super Freak
Originally Posted by FrostByte
Make yourself one of these
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360003"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360004"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360005"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360006"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360007"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360003"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360004"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360005"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360006"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=360007"/>