Quick LCA question
#1
JK Newbie
Thread Starter
Join Date: Aug 2008
Location: Cedar Lake, IN
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Quick LCA question
I'm finally going to fix my caster with some lower control arms...my question is what are most people setting there arms at with a 3.5" lift.. eye to eye measurement ??
#2
JK Jedi Master
Most people start at 23in eye to eye, and adjust from there if needed. Which is about 3/8in longer than stock.
Last edited by mkjeep; 10-22-2009 at 04:51 PM.
#3
JK Super Freak
x2 with 23" eye to eye...teraflex suggests adjusting them at different lengths...but just my personal experience, I found it never handled well set to different lengths and re-adjusted them to equal lengths (enough for me to have +5.5 castor)
#4
x2, i dont have a long are but best i could get my caster was 5.5 and it drives like stock no lights dings buzzes at any speed even on off on ramps
#5
JK Junkie
Mine appear to be just a tad (1/16-3/16) over 23", but the drivers side is about 1/8" longer. It is very difficult to get an accurate measurement with them installed at dusk. I will try measuring more accurately this weekend. 23" is certainly a good starting point.