Does it matter how I put my original disconnects on? I need a pic
Thread Starter
JK Enthusiast
Joined: Jun 2009
Posts: 420
Likes: 0
From: Surprise, Arizona, United States
Does it matter how I put my original disconnects on? I need a pic
I took off my teraflex disconnects-planning going with a 4" lift in the near future and the kit I am getting comes with disconnects.
I took off these disconnects to sell and now in the mean time I am going to put my original links back on.
Only problem is I dont remember how they originally went on. Do they go on with the cv boot up top on the sway bar itself or the loose bolt that you can remove up top?
Does it matter?
I took off these disconnects to sell and now in the mean time I am going to put my original links back on.
Only problem is I dont remember how they originally went on. Do they go on with the cv boot up top on the sway bar itself or the loose bolt that you can remove up top?
Does it matter?
Last edited by Basic13; Dec 25, 2009 at 06:34 PM.
JK Super Freak
Joined: Jan 2009
Posts: 1,219
Likes: 1
From: San Diego, CA
'09 X.
The bolt passes through the bushing on the bottom to the axle.
The threads coming out of the boot is connected to the sway bar on top.
https://www.jk-forum.com/forums/jk-write-ups-39/tereflex-quick-disconnect-install-21787/ Mine looks like the first pic.
The bolt passes through the bushing on the bottom to the axle.
The threads coming out of the boot is connected to the sway bar on top.
https://www.jk-forum.com/forums/jk-write-ups-39/tereflex-quick-disconnect-install-21787/ Mine looks like the first pic.