Teraflex 3" lift- height in a jk 4 door
Thread Starter
JK Newbie
Joined: Jul 2009
Posts: 26
Likes: 0
From: Vega Alta, PR
Teraflex 3" lift- height in a jk 4 door
Guys if I install a TF 3" in a jk 4 doors what would be the final height in the front and rear. What about if i install bumpers, winch, spare tire 35 etc.
JK Newbie
Joined: Nov 2008
Posts: 7
Likes: 0
From: Cedaredge, Colorado
Tereflex
Installed a 3 inch Tereflex and it lifted my Unlimited Rubi 5.5 inches. With 35s (BFG AT/KOs) the bottom of the front fender flare to the ground is 42.5 inches and rear is 42 inches. No bumpers/winch etc. With the unexpected additional height I have had to change out both drive shafts. You will need at least adjustable front lowers and rear uppers. Big jump getting in but it looks good.
JK Newbie
Joined: Sep 2009
Posts: 97
Likes: 0
From: Southern IN, across from the Ville
JK Super Freak
Joined: Dec 2008
Posts: 1,593
Likes: 2
From: Prescott, AZ
Lifted my JK Rubi 4 1/2" up front and about 4 in the rear. Thats with my Mopar Off Road bumpers, they arent that heavy but they are heavier than stock. That's what the springs are at after 4k miles and settled. Initially I had about 5" front and almost that in the rear.