Hello I have a 2010 Rubi 2dr and I am thinking about buying a Rough Country 3.25" Suspension Lift Kit , I am alos buy a set of 35" inch tires. Now my question is can I run this setup with the Factory Rubicon rims or do I or should i buy a set of rims?

 

Without getting into specific tire sizes, I'd say that you could likely use the stock rims but you'd definitely need to get spacers for them because if the tires are wider than stock, the backspacing of the stock rims might cause rubbing issues.

This info isn't from experience since I'm not running 35's so I'll let one of our many experts chime in on this.

 

I have a 07 unlimited and put a 2 1/2 in lift and only 33's on stock rims and I have rubbing issues. I can only imagine with 35's. Like previous poster said, can be done no problem, but also spend the extra and get spacers.

 

If you have the money I would buy a new set of rims otherwise the stock will work if you run spacers.

 

I have 07 Rubi 2dr w/AEV 3.5 and 35s you will need to atleast get wheel spacers until you buy new wheels

 

here's a show and tell thread all stock rims with 35's
https://www.jk-forum.com/forums/show...t=35%27s+stock

 

Im running BFG KM2s that are 35's on the Rubi rims....i have 1.5" spidertrax and have no issues at all...

 

x2....except Teraflex brand. No problems at all.