Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Issues with soundbar cap and wraparound windjammer on 2 door

Thread Tools
 
Old Aug 13, 2010 | 06:49 AM
  #1  
stink's Avatar
Thread Starter
JK Newbie
 
Joined: Nov 2008
Posts: 16
Likes: 0
From: Seattle, WA
Default Issues with soundbar cap and wraparound windjammer on 2 door

Man I am not having the best of luck with this set up. I just bought the Bestop windshield channel, bikini, soundbar cap, wraparound windjammer and duster.

The soundbar cap and windjammer came late but I tried to put on the bikini and duster twice now and have not been able to get it to stretch out. Frustrating! I'm near the Seattle area where the weather has been above 70 the whole time and I've had these products for over a week.

But that's not the real issue. I just got the soundbar cap and wraparound windjammer yesterday and realize that one of them has the "J" loop connector sewn on backwards, though I cannot confirm which one since I can't find detailed pics on Bestop's website. So I waited to call them this morning and their telephone is all garbled and I was able to hear, only through every other word, that they were having technical difficulties with their customer service.

The best description I can make is that the loop or open part of the "J" faces the front of the Jeep on both the soundbar cap and the windjammer. There is only one way to connect them and when off the vehicle and I connect them, one of the products is facing the wrong way.

UGH!
Reply
Old Aug 13, 2010 | 08:35 AM
  #2  
stink's Avatar
Thread Starter
JK Newbie
 
Joined: Nov 2008
Posts: 16
Likes: 0
From: Seattle, WA
Default

I just realized through searching the Internet that it's the soundbar cap that has the connector sewn on backwards...ugh! Of course on a Friday and this one had to come from Kansas - who would have thought that no one has these in stock in the Northwest.
Reply
Old Aug 13, 2010 | 09:08 AM
  #3  
Mark Doiron's Avatar
JK Jedi Master
Veteran: Air Force
FJOTM Winner
15 Year Member
Liked
 
Joined: Mar 2007
Posts: 14,800
Likes: 374
From: Midwest City, OK
Default

I don't have much to contribute to your problem except perhaps a little moral support. Bestop, sadly, has a great product line, but the quality has really fallen lately. Plenty of complaints here on this forum similar to yours that support that statement.
Reply
Old Jan 25, 2011 | 07:10 PM
  #4  
firemarshal's Avatar
JK Enthusiast
 
Joined: Jan 2011
Posts: 149
Likes: 0
From: Charlotte
Default

Did you ever get a resolution for your problem? I am very interested in this setup as well, but I am hesitant to buy anything from Bestop after some of the comments I have read.
Reply
Old May 19, 2012 | 01:07 PM
  #5  
Arctic's Avatar
JK Newbie
 
Joined: Feb 2012
Posts: 28
Likes: 0
From: Attleboro, MA
Default

Originally Posted by stink
Man I am not having the best of luck with this set up. I just bought the Bestop windshield channel, bikini, soundbar cap, wraparound windjammer and duster.

The soundbar cap and windjammer came late but I tried to put on the bikini and duster twice now and have not been able to get it to stretch out. Frustrating! I'm near the Seattle area where the weather has been above 70 the whole time and I've had these products for over a week.

But that's not the real issue. I just got the soundbar cap and wraparound windjammer yesterday and realize that one of them has the "J" loop connector sewn on backwards, though I cannot confirm which one since I can't find detailed pics on Bestop's website. So I waited to call them this morning and their telephone is all garbled and I was able to hear, only through every other word, that they were having technical difficulties with their customer service.

The best description I can make is that the loop or open part of the "J" faces the front of the Jeep on both the soundbar cap and the windjammer. There is only one way to connect them and when off the vehicle and I connect them, one of the products is facing the wrong way.

UGH!
Litterally.....Im having the same problem. word for word. Any updates on this problem. What can we do?
Reply
Old Jun 10, 2013 | 03:09 PM
  #6  
HoneyKatt21's Avatar
JK Newbie
 
Joined: Jun 2013
Posts: 2
Likes: 0
From: Seattle,WA
Default

Hey folks! New JK owner here in Seattle. I am also looking to get the Bestop Header Bikini, Wraparound Windjammer, Duster Deck Cover 52580-35KWA Bestop Bikini combo. I wanted a way to use the back seat area as storage instead of having to put down the seats every time I need to load something into the back. I also have a subwoofer back there that I need storage for. I was also going to purchase the Tuffy Security Deck Enclosure Black 173-01 Tuffy security enclosure for a little more piece of mind. But as I have read there are some leakage issues to contend with. I was hoping someone had an update on how/if the rain can be alleviated, especially in the Northwest's nearly always damp climate.
Thanks!
Reply
Old Jun 10, 2013 | 04:41 PM
  #7  
cluelessJK's Avatar
JK Enthusiast
Vet Army

 
Joined: May 2013
Posts: 217
Likes: 0
From: Washington
Default

Put pictures up Of the issues. I'm local to the Seattle area (puyallup) and I run the short bikini top, the one that just covers back to the sound bar, and it works amazing. I also run the door surrounds to pull the top tighter and seal the gap and so it's not wrapped around the roll bar anymore. Here are a few pictures: (sorry they are so crappy, I hop this helps!!)

As for the deck cover, that this is a piece of cake just pull it over the rails and tighten the straps around the roll bar and secure the tailgate bar (I run mine without a tailgate bar because I don't have one yet) also it's a good ides to create some kind of bar for underneath to raise the cover so the water doesn't puddle up in the middle.
Attached Thumbnails Click image for larger version

Name:	image-2004509857.jpg
Views:	189
Size:	49.1 KB
ID:	466640   Click image for larger version

Name:	image-936345884.jpg
Views:	154
Size:	51.7 KB
ID:	466641   Click image for larger version

Name:	image-3548226417.jpg
Views:	169
Size:	38.6 KB
ID:	466642   Click image for larger version

Name:	image-1052028729.jpg
Views:	150
Size:	57.2 KB
ID:	466643   Click image for larger version

Name:	image-3682612110.jpg
Views:	133
Size:	49.5 KB
ID:	466644  


Last edited by cluelessJK; Jun 10, 2013 at 04:44 PM.
Reply
Old Jun 12, 2013 | 08:16 AM
  #8  
HoneyKatt21's Avatar
JK Newbie
 
Joined: Jun 2013
Posts: 2
Likes: 0
From: Seattle,WA
Default

Originally Posted by cluelessJK
Put pictures up Of the issues. I'm local to the Seattle area (puyallup) and I run the short bikini top, the one that just covers back to the sound bar, and it works amazing. I also run the door surrounds to pull the top tighter and seal the gap and so it's not wrapped around the roll bar anymore. Here are a few pictures: (sorry they are so crappy, I hop this helps!!)

As for the deck cover, that this is a piece of cake just pull it over the rails and tighten the straps around the roll bar and secure the tailgate bar (I run mine without a tailgate bar because I don't have one yet) also it's a good ides to create some kind of bar for underneath to raise the cover so the water doesn't puddle up in the middle.
Thank you for your response cluelessJK! Do you run the bikini/deck cover combo all year with no water leakage? It didn't look (from the photos) like you had a windjammer, do you? Do you know what brand or model numbers you currently have? I've been reading up on reviews and some people have said it leaks a fair amount and some say it doesn't leak at all. Since you are in the area and know what kind of crazy rain we deal with almost year round I would trust if yours doesn't leak mine should be ok too.
Reply
Old Jun 12, 2013 | 08:28 PM
  #9  
cluelessJK's Avatar
JK Enthusiast
Vet Army

 
Joined: May 2013
Posts: 217
Likes: 0
From: Washington
Default

Originally Posted by HoneyKatt21

Thank you for your response cluelessJK! Do you run the bikini/deck cover combo all year with no water leakage? It didn't look (from the photos) like you had a windjammer, do you? Do you know what brand or model numbers you currently have? I've been reading up on reviews and some people have said it leaks a fair amount and some say it doesn't leak at all. Since you are in the area and know what kind of crazy rain we deal with almost year round I would trust if yours doesn't leak mine should be ok too.
I'm not running a windjammer currently, I have been looking at them but the wife and I have a little one on the way so I don't think I'm going to get one . I've been in the rain a few times with just the top and tonneau cover with minimal issues the only rain that gets in is from behind since you don't have anything covering your back lol.. You may get a little tiny bit wet from to time but nothing the wife and I can't deal with! I will literally run the tonneau and bikini probably most of the year since i know it works one hell of a lot better than just the two freedom tops, those suck for running in the rain. That was a terrible design by mopar, just with the shape and the way they developed the sound bar setup.

As a caveat: I have been driving to work The past two-three weeks with this combo most time with the doors on and it's been in the low 40's and I have just a sweatshirt on at 60+mph and the heater on low and I'm just fine!!

I don't have the part numbers but I will post links from q-tec to the exact one that I have

Bikini top: http://www.quadratec.com/products/11130_023X_PG.htm

Tonneau: http://www.quadratec.com/products/11154_013X_PG.htm

I do however run the factory mopar door surrounds I picked up on CL, if you guys are on there often a guy has the entire bikini, tonneau, windjammer combo for sale if you type in "JK" hope this helps!!

Last edited by cluelessJK; Jun 12, 2013 at 08:33 PM.
Reply




All times are GMT -8. The time now is 01:02 PM.