Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

'10 jk running 15" rims?

Thread Tools
 
Old Sep 3, 2010 | 05:10 PM
  #1  
Stonewhite JK's Avatar
Thread Starter
JK Enthusiast
 
Joined: Aug 2010
Posts: 107
Likes: 0
From: Frazier Park, CA
Default '10 jk running 15" rims?

Hello new to the forum...i just bought a new jk unlimited sport. i want to put new wheels and tires and ditch my stock 16's... i have a 75 international scout 2 that i had sitting around as a project with a new set of 15" soft 8's and new 33 hankook dynapros. long story short will a 15 inch rim fit on the jk and clear the disk calipers? if so i plan on running those wheels and tires. thanks
Reply
Old Sep 3, 2010 | 05:15 PM
  #2  
cferrell's Avatar
JK Enthusiast
 
Joined: Jul 2010
Posts: 108
Likes: 0
From: Houston, TX
Default

The 15" wheels should clear the calipers depending on the backspacing on the wheels. At worst, you may have to file/sand down the outside edge of the caliper.
Reply
Old Sep 3, 2010 | 05:16 PM
  #3  
Dronac's Avatar
JK Freak
 
Joined: Jan 2010
Posts: 726
Likes: 0
From: Charlotte, NC
Default

Sometimes yes, sometimes no. Discount Tire tried to put mine on and one caliber was rubbing. To compensate for it, they are giving me a 1/4'' spacer for each rotor, although I will have to put them on myself.
Reply
Old Sep 3, 2010 | 06:10 PM
  #4  
Stonewhite JK's Avatar
Thread Starter
JK Enthusiast
 
Joined: Aug 2010
Posts: 107
Likes: 0
From: Frazier Park, CA
Default

the wheels i plan on buying have a 4" backspacing.
Reply
Old Sep 3, 2010 | 06:12 PM
  #5  
Rustler's Avatar
JK Enthusiast
 
Joined: May 2008
Posts: 487
Likes: 0
From: Phoenix, AZ
Default



MB72 -19mm BS 35 12.50 15 Goodyear Kevlar

No rubbing no spacers no modification of calipers.
Reply
Old Sep 3, 2010 | 06:17 PM
  #6  
cppower's Avatar
JK Freak
 
Joined: Jun 2008
Posts: 663
Likes: 0
From: Plano, Tx
Default

Originally Posted by Dronac
Sometimes yes, sometimes no. Discount Tire tried to put mine on and one caliber was rubbing. To compensate for it, they are giving me a 1/4'' spacer for each rotor, although I will have to put them on myself.
This is a bad thing. You should never use spacers of that type because they reduce the available threads for your lugnuts.
Reply
Old Sep 3, 2010 | 06:19 PM
  #7  
cferrell's Avatar
JK Enthusiast
 
Joined: Jul 2010
Posts: 108
Likes: 0
From: Houston, TX
Default

Originally Posted by Stonewhite JK
the wheels i plan on buying have a 4" backspacing.
4" of BS should clear with no problem then.
Reply
Old Sep 3, 2010 | 10:36 PM
  #8  
Stonewhite JK's Avatar
Thread Starter
JK Enthusiast
 
Joined: Aug 2010
Posts: 107
Likes: 0
From: Frazier Park, CA
Default

thanks for the help.
Reply




All times are GMT -8. The time now is 06:23 PM.