PSI Goodyear Duratrac's
Thread Starter
JK Newbie
Joined: Mar 2011
Posts: 48
Likes: 0
From: Tempe, AZ
PSI Goodyear Duratrac's
Put Goodyear Duratracs 285/75/R16 on my JK, 4 wheel parts put them at 38 PSI, seems high? Id like to get some insight on the best PSI for street driving and off road...thanks!
JK Enthusiast
Joined: May 2007
Posts: 168
Likes: 1
From: Seattle, WA
I have 285/70/17 duratrac's in load range D. The best psi on my unlimited is 30 psi, verIfied by a chalk test. I don't air down wheelin. 38 is high, but depending if your tires are load E or D, i would start around 32, and work your way down.
Thread Starter
JK Newbie
Joined: Mar 2011
Posts: 48
Likes: 0
From: Tempe, AZ
They're load E, rough ride...
Ill put them down to 32 and test em, go from there. thanks. For wheelin', i do a lot of AZ rock climbing so Id like to go lower for that, 20 PSI. I dont have bead locks though so Im worried about that...
Ill put them down to 32 and test em, go from there. thanks. For wheelin', i do a lot of AZ rock climbing so Id like to go lower for that, 20 PSI. I dont have bead locks though so Im worried about that...
