i currently have the 2" front and 1" rear leveling spacers on my 2010 JKU. Was wander if I would be ab;e tp leave one of the 1" spacers on the front and the 1" spacer on the rear or is this not advisable. Any input?

 

I have the Teraflex 2.5 coil lift, I added a 1" spacer on top of that on the front. It's noticably higher in the front, but I like it.

 

I've got the 2.5 with a 1 inch spacer in the rear to help get it back level with my 35" spare. Ended up with a slight rake but I like the look of a little.

 

I have a 2 1/2" TF coil lift and 1" front spacer on my 2022 Unlimited Rubicon with LOD front and rear bumpers, 35" GY MTR tires and superwinch on the front. She looks pretty level now. Love the set up. I have had no problems at all.








2011 Unlimited, RUBICON, 2.5” Teraflex coil lift +shocks, 1” teraflex front spacer, 17 x 9 XD black SPY wheels, Taraflex adj. front track bar, JKS rear track bar, 35x12.5 Goodyear MTR, 4.10 6 speed, Superchips FP, Mopar extended Rubicon rails, Mopar Sun bonnet, LOD front and rear bumpers with tire carrier, crown extended front brake lines, TF front adj. control arms, Superwinch EPi9.0s, ARB on board air compressor

 

I have the Tf 2.5 coil with 1" spacer up front.