JK Front Track bar - Can I press out swivel bushing?
Thread Starter
JK Newbie
Joined: Jan 2012
Posts: 1
Likes: 0
From: Portland
JK Front Track bar - Can I press out swivel bushing?
Not sure if the front frame side track bar bushing on my 12 is a new thing or same on all the JK's, but the sleeve / bushing is much thinner walled than the other 3 track bar bushings (traditional rubber) and as such when I torqued it down (by hand) this last time it deformed because the bracket had already gone a bit oval from the 14mm bolt problem...
What I'm wanting to know is can I have the swivel bushing pressed out and then press in one of my spare bushings from the rear track bar? Need to get this rig back on the road. Cheers!
What I'm wanting to know is can I have the swivel bushing pressed out and then press in one of my spare bushings from the rear track bar? Need to get this rig back on the road. Cheers!
JK Junkie
Joined: Jan 2010
Posts: 3,796
Likes: 3
From: Stokesdale, NC