OME LT Rear Springs on a JKU
Thread Starter
JK Super Freak
Joined: Feb 2009
Posts: 1,236
Likes: 0
From: Pittsburgh, PA
OME LT Rear Springs on a JKU
Has anyone had experience with the Rear 617 Old Man Emu LT 2.25" Springs on a JKU? I'm wondering how much lift was gained and what the setup was (i.e. bumper/tire carrier)?
I made an impulse buy for a cheap set of scratch n dent rear springs prior to researching. I then searched through threads (yes, I should've done that first) and found that one person only gained 1.25" with the springs! I was looking to replace my 2" TF spacers and stock springs since they have sagged a bit since adding 160lbs. in tire carrier and bumper weight. Any input would be appreciated.
I made an impulse buy for a cheap set of scratch n dent rear springs prior to researching. I then searched through threads (yes, I should've done that first) and found that one person only gained 1.25" with the springs! I was looking to replace my 2" TF spacers and stock springs since they have sagged a bit since adding 160lbs. in tire carrier and bumper weight. Any input would be appreciated.
JK Freak
Joined: Apr 2011
Posts: 601
Likes: 0
From: Las Vegas
Trying to remember which I have. I have the hd ones but not positive on the number. I got just about 3.75" with mine. I had a...rubicon lift/coils before that. I got my jk used so it had a few things which I promptly removed. 