Am I missing something or just not finding it. I need the part numbers for the four pinion nuts when I replace the driveshafts. I am assuming that front diff, front output shaft from transfer case, rear output shaft from transfer case, and rear diff.........PLEASE HELP. I have looked all over and searched keywords and only have come up with two numbers. Anyones help is greatly appreciated. I have a 2009 2door rubicon with auto trans.

 

Bump... No one :(

 

What shaft are you using? Doesn't it come with the bolts?

 

use your old ones and locktight them.

 

I looking for the pinion nuts.

 

Either use your old ones or go to your local dealership

 

The part numbers i have for the pinion nuts are as follows. for the front: 04720895, for the rear: 05191197AA. these are the part numbers J.E Reel has in their drive shaft instructions as they tell you to replace them. hope this helps.

 

I used loctite and torqued to specs to avoid damaging the nuts. From what I read if you over torque them your screwed and need to order new ones for sure.

 

Thanks to all. Ordered all four today. Front diff# 4720895aa, front and rear output 5143738ab, and rear diff#5191197aa.