Quadratec Floor Liner Badges
Thread Starter
JK Enthusiast
Joined: Jun 2011
Posts: 335
Likes: 0
From: Spring, TX
Quadratec Floor Liner Badges
Just received my Quadratec floor liners, and I think they are great. The only thing I don't like... The Quadratec logos on them. No offense to Quadratec, but I can't stand their green and gold logo.
Has anyone else found something different to replace the 3.5" x 1" domed badges? I noticed they are attached with 2 posts, but I think a decent adhesive decal might work if it was the right dimensions.
Has anyone else found something different to replace the 3.5" x 1" domed badges? I noticed they are attached with 2 posts, but I think a decent adhesive decal might work if it was the right dimensions.
JK Enthusiast
Joined: Aug 2010
Posts: 350
Likes: 2
From: Kemah, TX
Should have forked over the extra 20 bucks and got the tread lightly ones- same mat just with a different tag. The extra money goes to the tread lightly foundation. So it's a win win for everyone!! I have a set in both my JKUs.
JK Enthusiast
Joined: May 2012
Posts: 163
Likes: 0
From: Charleston, SC
Thread Starter
JK Enthusiast
Joined: Jun 2011
Posts: 335
Likes: 0
From: Spring, TX
I considered the Tread Lightly mats, but I didn't really like their busy logo any better... I may be a little picky.
I could always have some custom made... If I wanted 150 of them.
I could always have some custom made... If I wanted 150 of them.
JK Enthusiast
Joined: Feb 2012
Posts: 259
Likes: 0
From: Lancaster, CA
Mine fell off and like them just fine that way.
Oh, if you have the rear cargo area mat, DO NOT take off your windows and place them on the rear mat. Why you ask? Because in the summer time the mat will melt. Well, out here it will. Must not have done extensive environmental testing on those units.
Oh, if you have the rear cargo area mat, DO NOT take off your windows and place them on the rear mat. Why you ask? Because in the summer time the mat will melt. Well, out here it will. Must not have done extensive environmental testing on those units.
JK Freak
Joined: Jun 2009
Posts: 600
Likes: 0
From: Innisfil, Ontario, Canada
a little heads up with those mats. i have the same ones and over the winter
with snow and slush coming in the water will get between the logo and then
go down the little holes rusting out the metal pieces leaving rust marks
on ur carpet. so i took out the mats and put liquid gasket between the mat and the logo
that hardens into a rubbie plastic to prevent water from going throw the holes.
just a little heads up to keep the carpet looking nice.
with snow and slush coming in the water will get between the logo and then
go down the little holes rusting out the metal pieces leaving rust marks
on ur carpet. so i took out the mats and put liquid gasket between the mat and the logo
that hardens into a rubbie plastic to prevent water from going throw the holes.
just a little heads up to keep the carpet looking nice.
Trending Topics
JK Enthusiast
Joined: Aug 2011
Posts: 130
Likes: 0
From: whittier, ca
you can get the rugged ridge inserts and swap them out 
same insert and attach the same way.. i posted in another thread where someone was asking the difference between the RR and QT mats. i think they are the same and this is another clue that they are in fact the same mats just re-logo'd
same insert and attach the same way.. i posted in another thread where someone was asking the difference between the RR and QT mats. i think they are the same and this is another clue that they are in fact the same mats just re-logo'd
JK Newbie
Joined: May 2012
Posts: 77
Likes: 0
From: BFE
a little heads up with those mats. i have the same ones and over the winter
with snow and slush coming in the water will get between the logo and then
go down the little holes rusting out the metal pieces leaving rust marks
on ur carpet. so i took out the mats and put liquid gasket between the mat and the logo
that hardens into a rubbie plastic to prevent water from going throw the holes.
just a little heads up to keep the carpet looking nice.
with snow and slush coming in the water will get between the logo and then
go down the little holes rusting out the metal pieces leaving rust marks
on ur carpet. so i took out the mats and put liquid gasket between the mat and the logo
that hardens into a rubbie plastic to prevent water from going throw the holes.
just a little heads up to keep the carpet looking nice.
Good to know!, thank you very much for posting.
I put these mats in mine the day I bought it, trying to keep the interior MINT. I will be doing that very soon.