When doing a body lift, is there a way to relocate the front bumper?
Thread Starter
JK Enthusiast
Joined: Sep 2012
Posts: 114
Likes: 0
From: Dumont, CO United States
When doing a body lift, is there a way to relocate the front bumper?
I've seen rear bumper relocations, but not front.
I'm on a 2" OME lift & ARB full width bumper & 35's. I get a decent amount of rub, so I was thinking about doing a 1.25 BL, but I rub on my bumper pretty hard if I'm turned at full stuff at all.
I'm thinking the body lift would be a good compliment to my low setup, but If I'm still rubbing on the bumper, it seems kind of pointless.
Any suggestions?
I'm on a 2" OME lift & ARB full width bumper & 35's. I get a decent amount of rub, so I was thinking about doing a 1.25 BL, but I rub on my bumper pretty hard if I'm turned at full stuff at all.
I'm thinking the body lift would be a good compliment to my low setup, but If I'm still rubbing on the bumper, it seems kind of pointless.
Any suggestions?
JK Freak
Joined: Jul 2012
Posts: 758
Likes: 0
From: pittsgrove nj
I've seen rear bumper relocations, but not front.
I'm on a 2" OME lift & ARB full width bumper & 35's. I get a decent amount of rub, so I was thinking about doing a 1.25 BL, but I rub on my bumper pretty hard if I'm turned at full stuff at all.
I'm thinking the body lift would be a good compliment to my low setup, but If I'm still rubbing on the bumper, it seems kind of pointless.
Any suggestions?
I'm on a 2" OME lift & ARB full width bumper & 35's. I get a decent amount of rub, so I was thinking about doing a 1.25 BL, but I rub on my bumper pretty hard if I'm turned at full stuff at all.
I'm thinking the body lift would be a good compliment to my low setup, but If I'm still rubbing on the bumper, it seems kind of pointless.
Any suggestions?
While you can't relocated it up you might be able to space it out from the frame rails 1/2" or so. I know this would not be hard with a stock bumper but an ARB might have other mounting points besides the 8 bolts on the ends of the frame rails.
Steve
Sponsoring Manufacturer
Joined: May 2012
Posts: 385
Likes: 1
From: FULLERTON,CA
I've seen rear bumper relocations, but not front.
I'm on a 2" OME lift & ARB full width bumper & 35's. I get a decent amount of rub, so I was thinking about doing a 1.25 BL, but I rub on my bumper pretty hard if I'm turned at full stuff at all.
I'm thinking the body lift would be a good compliment to my low setup, but If I'm still rubbing on the bumper, it seems kind of pointless.
Any suggestions?
I'm on a 2" OME lift & ARB full width bumper & 35's. I get a decent amount of rub, so I was thinking about doing a 1.25 BL, but I rub on my bumper pretty hard if I'm turned at full stuff at all.
I'm thinking the body lift would be a good compliment to my low setup, but If I'm still rubbing on the bumper, it seems kind of pointless.
Any suggestions?
Thread Starter
JK Enthusiast
Joined: Sep 2012
Posts: 114
Likes: 0
From: Dumont, CO United States
YEAH YEAH... tell me what I already knew...
I'm just delaying the inevitable.
The last thing I'd want to do is relocate this bumper more forward, it already hit everything it can find on the trail. People talk about what great bumper it is, but I'm not terribly impressed.
On buddy suggested cutting down the ARB... but not sure how that would look
Seems like it would be kind of goofy.
Don't really want to spend the $$ on a bumper right now, and doubt I'll get much $$ from mine. What a pain. Seems hard to believe that an aftermarket bumper can't handle 35's.
I'm just delaying the inevitable.The last thing I'd want to do is relocate this bumper more forward, it already hit everything it can find on the trail. People talk about what great bumper it is, but I'm not terribly impressed.
On buddy suggested cutting down the ARB... but not sure how that would look
Seems like it would be kind of goofy.
Don't really want to spend the $$ on a bumper right now, and doubt I'll get much $$ from mine. What a pain. Seems hard to believe that an aftermarket bumper can't handle 35's.