JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
JK Talk General discussion forum regarding thoughts, opinions and rumors about the Jeep JK Wrangler or related subjects that don't quite fit in the Modified, Stock or Electronics forums.

37's on 2.5" of lift?

Thread Tools
 
Old May 14, 2013 | 09:38 PM
Share
  #1  
shag7265's Avatar
shag7265
Thread Starter
JK Freak
 
Joined: Oct 2011
Posts: 657
Likes: 0
From: Lumberton, TX
Default 37's on 2.5" of lift?
I have a 12 jkur auto with a 2.5" teraflex coil lift with front adj lower control arms and a adj front track bar, and trimmed fenders and pinch seam. I am currently running 35x1250 km2's. I want 37's. Tell me why I shouldn't throw them on and go.
Reply
0
Old May 15, 2013 | 02:45 AM
Share
  #2  
westchester's Avatar
westchester
JK Super Freak
 
Joined: Apr 2007
Posts: 1,866
Likes: 3
From: Eastern Long Island, NY
Default
Planman has this set-up, his write-up is here on the forum somewhere.
Reply
0
Old May 15, 2013 | 04:36 AM
Share
  #3  
5110's Avatar
5110
JK Enthusiast
 
Joined: Apr 2008
Posts: 173
Likes: 0
From: rc,sd, us
Default
I'd like this setup too.
Reply
0
Old May 15, 2013 | 04:44 AM
Share
  #4  
westchester's Avatar
westchester
JK Super Freak
 
Joined: Apr 2007
Posts: 1,866
Likes: 3
From: Eastern Long Island, NY
Default
Couple of good threads and write-ups for LCG 37s are here https://www.jk-forum.com/forums/jk-w...8/#post3375491 and https://www.jk-forum.com/forums/jk-s...builds-271161/
Reply
0
Old May 15, 2013 | 05:13 AM
Share
  #5  
bob-o's Avatar
bob-o
JK Junkie
 
Joined: Jun 2012
Posts: 2,215
Likes: 2
From: rosamond, ca
Default
Originally Posted by shag7265
I have a 12 jkur auto with a 2.5" teraflex coil lift with front adj lower control arms and a adj front track bar, and trimmed fenders and pinch seam. I am currently running 35x1250 km2's. I want 37's. Tell me why I shouldn't throw them on and go.
I had this same setup last year. Tf 2.5", 1.25" RC body lift. 37" km2's, stock bumpstop up front, tf 2.5" bumpstop in the rear, stock rubi shocks with tf extensions, trimmed fenders pinch seam and rubi sliders. I will post a few pics of it then and my jeep now
Reply
0
Old May 15, 2013 | 05:17 AM
Share
  #6  
bob-o's Avatar
bob-o
JK Junkie
 
Joined: Jun 2012
Posts: 2,215
Likes: 2
From: rosamond, ca
Default
Tf 2.5",rubi shocks and extensions, 1.25 body lift

Click image for larger version Name: ForumRunner_20130515_061507.jpg Views: 253 Size: 51.6 KB ID: 458047



Click image for larger version Name: ForumRunner_20130515_061530.jpg Views: 224 Size: 46.7 KB ID: 458048



Click image for larger version Name: ForumRunner_20130515_061627.jpg Views: 198 Size: 51.2 KB ID: 458049
Reply
0
Old May 15, 2013 | 05:30 AM
Share
  #7  
bob-o's Avatar
bob-o
JK Junkie
 
Joined: Jun 2012
Posts: 2,215
Likes: 2
From: rosamond, ca
Default
Now I have 2.5" rk coils up front, rear lower and upper spring retainers, front lower spring retainers, evo rockstars, bilsteins for a 4" lift up front, 2" rear, 1.75" bumpstop on front lower perch plus the factory bump, tf 2.5" rear bump stop, 9" long rear sway bar links, 11" long in front

Click image for larger version Name: ForumRunner_20130515_062614.jpg Views: 209 Size: 40.6 KB ID: 458053



Click image for larger version Name: ForumRunner_20130515_062635.jpg Views: 217 Size: 49.1 KB ID: 458054



Click image for larger version Name: ForumRunner_20130515_062435.jpg Views: 224 Size: 57.4 KB ID: 458050



Click image for larger version Name: ForumRunner_20130515_062502.jpg Views: 211 Size: 79.9 KB ID: 458051



Click image for larger version Name: ForumRunner_20130515_062541.jpg Views: 241 Size: 55.3 KB ID: 458052
Reply
0

Trending Topics

Old May 15, 2013 | 06:11 AM
Share
  #8  
kh202's Avatar
kh202
JK Junkie
 
Joined: May 2010
Posts: 3,142
Likes: 2
From: Rockwood, TN
Default
Originally Posted by shag7265
I have a 12 jkur auto with a 2.5" teraflex coil lift with front adj lower control arms and a adj front track bar, and trimmed fenders and pinch seam. I am currently running 35x1250 km2's. I want 37's. Tell me why I shouldn't throw them on and go.
You shouldn't throw them on until you atleast beef up the front axle. I would truss and gusset at a minimum. If you already have them, go for it!!
Reply
0
Old May 15, 2013 | 06:50 AM
Share
  #9  
shag7265's Avatar
shag7265
Thread Starter
JK Freak
 
Joined: Oct 2011
Posts: 657
Likes: 0
From: Lumberton, TX
Default
Originally Posted by bob-o
Now I have 2.5" rk coils up front, rear lower and upper spring retainers, front lower spring retainers, evo rockstars, bilsteins for a 4" lift up front, 2" rear, 1.75" bumpstop on front lower perch plus the factory bump, tf 2.5" rear bump stop, 9" long rear sway bar links, 11" long in front

<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=458053"/>

<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=458054"/>

<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=458050"/>

<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=458051"/>

<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=458052"/>
Do you still have a body lift? And is it needed to dit the 37's. I'm not a big fan of body lifts so if I need another inch of lift to run the 37's I wil probably get new springs.
Reply
0
Old May 15, 2013 | 07:09 AM
Share
  #10  
bob-o's Avatar
bob-o
JK Junkie
 
Joined: Jun 2012
Posts: 2,215
Likes: 2
From: rosamond, ca
Default
Originally Posted by shag7265

Do you still have a body lift? And is it needed to dit the 37's. I'm not a big fan of body lifts so if I need another inch of lift to run the 37's I wil probably get new springs.
I do still have the body lift. U can fit 37's without a lift and have flat fenders but without the body lift u would have to run taller bumpstops front and rear,
or run. 1.5-2" extra bump stop in the front and 2.5" in the rear plus some extra trimming off the rear pinch seam
Last edited by bob-o; May 15, 2013 at 07:11 AM.
Reply
0



Advanced Search

All times are GMT -8. The time now is 03:07 AM.