2013 JK Unlimited Rubicon - Trade in Value
Thread Starter
JK Newbie
Joined: Oct 2010
Posts: 40
Likes: 0
From: Kansas
2013 JK Unlimited Rubicon - Trade in Value
I am curious if anyone on here would know what a modified wrangler would get as a trade in value.
My jeep is a 2013 Wrangler Unlimited Rubicon. It is orange crush outside
and black cloth inside.The condition is showroom on everything. The
Jeep has the following options: automatic transmission, navigation,
conectivity package (power windows, power locks, Bluetooth,
information center), trailer package, automatic a/c, hard top, and
remote start. It only has 3200 miles. My jeep currently has many aftermarket
additions:
1. Smittybilt XRC front bumper
2. Smittybilt XRC Rear bumper and tire carrier
3. 2.5 inch teraflex suspension lift with upgraded dual reservoir fox
shocks, exhaust spacer, and alignment cam, all professionally
installed.
4. Smittybilt XRC 8 comp winch with synthetic line and cover
5. N-fab side steps
6. Pair of KC slimlight long range lights mounted near windshield
7. Pair of KC slimlight driving lights mounted on front bumper
-Both sets of lights wire to switches on A-Pillar
8. Set of 5 - 17x9 Ion Alloy wheels with beadlock look
9. Set of 5 - 315/70/17 BF Goodrich All terrain tires with around 800 miles.
10. AEV Procal module
11. Mopar Slush mats
Any input would be great. I am not interested in selling any of the parts because I already sold the original ones.
My jeep is a 2013 Wrangler Unlimited Rubicon. It is orange crush outside
and black cloth inside.The condition is showroom on everything. The
Jeep has the following options: automatic transmission, navigation,
conectivity package (power windows, power locks, Bluetooth,
information center), trailer package, automatic a/c, hard top, and
remote start. It only has 3200 miles. My jeep currently has many aftermarket
additions:
1. Smittybilt XRC front bumper
2. Smittybilt XRC Rear bumper and tire carrier
3. 2.5 inch teraflex suspension lift with upgraded dual reservoir fox
shocks, exhaust spacer, and alignment cam, all professionally
installed.
4. Smittybilt XRC 8 comp winch with synthetic line and cover
5. N-fab side steps
6. Pair of KC slimlight long range lights mounted near windshield
7. Pair of KC slimlight driving lights mounted on front bumper
-Both sets of lights wire to switches on A-Pillar
8. Set of 5 - 17x9 Ion Alloy wheels with beadlock look
9. Set of 5 - 315/70/17 BF Goodrich All terrain tires with around 800 miles.
10. AEV Procal module
11. Mopar Slush mats
Any input would be great. I am not interested in selling any of the parts because I already sold the original ones.
JK Super Freak
Joined: Aug 2012
Posts: 1,100
Likes: 1
From: Mission Viejo, CA
I know you don't want to take the parts off but in the interest of getting the most for your trade in, it is the best idea. If you were to trade in your vehicle modified that limits the possible buyer pool for the vehicle so the dealership will want to offer you less for the vehicle. So best guess as to what they would offer you? Go to Kelly Blue Book and see what that says for a stock vehicle and knock a couple grand off that number. If it was me, I would find someone local who has a stock Jeep that wants to upgrade. Trade him your upgrades their factory stuff plus a couple bucks. Good luck.
