As anyone installed a Electric Life keyless entry system that converted manual to power locks (no switch) my plan was to remove the doors and put in the actuators and then wire it up, but I wanted to make sure everything worked so I pre wired it in my LR to test it out and of course it didn't work as soon as I apply power the locks push out or suck in and the remote does nothing, I tried everything I cold to figure it out but the wiring they provide is not the best and trouble shooting is even worse. When I originally purchased it I contacted them because the wiring they sent me did not match the actuators they said they were wrong and sent me another set they also sent two different schematics... So I guess I am hoping someone installed this kit and it works and they still might have their wiring diagram they used maybe that will help me figure it out..... A couple of side notes yes attempted to contact electric life still waiting a response and yes the remote battery is operating at least the light blinks when pushed

Thanks in advance