I was wondering if anyone has the size of tubes for dana 44.

Length for long side and short side
And thickness


For the inner sleeves. I have plenty of tubes laying around and since its free... i am not gonna bother spending 140$ on sleeves.

I just need to know the specs that i cannot seem to find.


Thank you in advance.

 

2" id
2.5 od
.25" wall

 

Thank you very much good sir

 

I'm considering this too. I saw this today...

SYNERGY MANUFACTURING*::*Jeep JK*::*Synergy Jeep JK, TJ/LJ, XJ, ZJ D30/44 Inner Axle Sleeve Kit

"Made from 2.0" x .250 1026 DOM Tubing (1.50" ID), Machined OD to fit snugly into the stock axle housing"

When I saw the "machined OD to fit snugly" and your post later, it made me wonder if standard DOM would work or if it in fact needs to be machined? I'm not trying to rain on your parade. I'd just hate to tear everything down just to find out it doesn't fit.

 

That is no biggie. I apprexiate the input i got a buddy who is a fabicrator and my father has been in the trade industruy for over 40 years. He was the one who suggested making our own. But i will talk to him tommorow about the aize and see what he thinks. Thanks.

 

If you still need the lengths, I can go measure. I've got a pair of teraflex sleeves sitting in the garage...

 

That would be super. Its no rush

 

Perfect, sounds like you are all set. The curiosity got the best of me seeing the ad online then your post shortly after. Let me know how it works out.

 

Passenger sleeve is 26 inches long

Driver side sleeve is 11 inches

 

Be carefull one post above says 2" ID And another above says 1 1/2" ID