If I add a real off road bumper to my ride how much sag can I expect and will I see any noticeable difference in performance?

I currently have a plastic stock bumper and I plan to add a metal bumper in the range of 55-65lbs.

thanks for looking

 

50-60lbs probably not enough to make a difference. set something that weighs 60lbs on front bumper and see how much it sags.

 

Had a 2" spacer lift and lost almost an inch after installing SRC gen 2 bumper and winch. Installed a Rancho 2" sport lift and got back the lost inch plus more.

 

maybe a 1/2 inch drop / not to even worry as far as im concerned

Go for it . You wont see any diff in handling either . maybe if you added 200 lbs ( bumper and winch combined ) you might !

I kept mine stock height no lift, no coil spacers, nothing .

 

I have a 2 inch BDS spring lift and a warn elite series front bumper without a winch and my front sags about 1/2 inch, maybe a an inch. Nobody else notices but me. Figured i would put a 1 inch puck on the front springs eventually. Doesn't effect the driving at all.

 

that ride already has a bumper. Where's a pic of your rig?

 

 

That's a TJ this forum is for JK's. You might get more useful info on another forum..

 

all you're doing is proving these guys right in knowing you're that same DB. "Shiftknowledge". Your life must be pathetic. Find something to do man.

 

...

Rock don't care...