Teraflex hinge tire carrier DIY jerry can rack

Reply Subscribe

Thread Tools

Jun 28, 2015 | 05:43 PM

Dlampe

Thread Starter

JK Enthusiast

Joined: Aug 2010

Posts: 476

Likes: 0

From: Illinois

Teraflex hinge tire carrier DIY jerry can rack

I spent the last few days working on a jerry can rack that would bolt to my Teraflex tire carrier. It also holds my CB antenna, third brake light and rear flood lights. I think it's strong enough but if not please let me know.

Click image for larger version

Name: image-2870316689.jpg
Views: 1001
Size: 545.4 KB
ID: 616302

Jun 28, 2015 | 05:46 PM

Dlampe

Thread Starter

JK Enthusiast

Joined: Aug 2010

Posts: 476

Likes: 0

From: Illinois

Here is another picture.

Click image for larger version

Name: image-4036366445.jpg
Views: 866
Size: 533.8 KB
ID: 616304

Jun 28, 2015 | 05:49 PM

Dlampe

Thread Starter

JK Enthusiast

Joined: Aug 2010

Posts: 476

Likes: 0

From: Illinois

Final assembly.

Click image for larger version

Name: image-3484588247.jpg
Views: 767
Size: 476.5 KB
ID: 616305

Jun 28, 2015 | 06:10 PM

bob987909

JK Newbie

Joined: Apr 2015

Posts: 76

Likes: 0

From: Houston, Texas

Quote:

Originally Posted by Dlampe

Final assembly.

<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=616305"/>

Looks good. What all did you use to make it?

Jun 29, 2015 | 08:37 AM

Dlampe

Thread Starter

JK Enthusiast

Joined: Aug 2010

Posts: 476

Likes: 0

From: Illinois

It was made from steel I had lying around. The top rail is 1 inch box tubing and the supporting bars are 1.5 angle iron. I used the smittybilt can basket to hold the jerry can.

Jun 21, 2016 | 06:30 PM

pitbull62

JK Enthusiast

Joined: Jan 2016

Posts: 111

Likes: 0

From: Redlands, Ca

Quote:

Originally Posted by Dlampe

It was made from steel I had lying around. The top rail is 1 inch box tubing and the supporting bars are 1.5 angle iron. I used the smittybilt can basket to hold the jerry can.

i know this is an old post but curious if your setup has much movement. i fabbed up a jerry can holder to hold two cans. mine has a little bit of movement which I'm still working on.