I have a 2008 Rubicon unlimited.

I have the stock wheels and tires.

Two questions:

1.) What size spacers should I but to push the wheel/tires out to the edge of the stock fenders. I do not want them to extend beyond the fenders.

2.) Any recommendations on brands of spacers?

THANKS!!!!!!!

 

Spidertrax 1.5" will put them about on the outter edge of the flares.

I've had mine for a year now now issues .

 

x2 on the spidertrax. I just got mine last week and love them.

 

TeraFlex & SpiderTraxx are the popular brands...TeraFlex has them available in 1", that should get you the desired look....Not sure if SpiderTraxx has that size available, but their 1.5" spacers should ~ show 3/4" of rubbler past the fender...Hopefully others may chime in to correct or confirm my comments....

 

Stock



Spacers on. 1.5 Inch Spidertraxx

 

If you get anthing smaller than 1.5in , you'll have to cut some length off your stock studs .

 

I ran the spidertrax spacers and loved them until I got new wheels.

 

i have been running the spidertrax for about a year now. no issues, resolved the rubbing i had when i put the new tires one. i passed state inspection with no problems.

well worth the money and gives the JK a great look

 

If I get the 1.5 spacers will my stock wheels/tires rub? Do I need a lift kit? I was not planning on a lift kit.

Thanks for all of your help!!!

 

You won't need a lift. The spacers move the tires out, not up. I put wide tires on and had a rub issue with the rear tires.