Has anyone installed 3/4" spacers in addition to the full traction 3" lift? or any 3" lift for that matter that left the jeep tilting forwards still?

I just bought the full traction eco lift from northridge largely becuae of the detailed write up on myproject-jk.com. I know I'll need to get a new trac bar and control arms over the next little bit for it to function properly, but I'll sufffer for a little while I guess. Anyways, I don't like the look of the jeep being unlevel, so can I buy the skyjacker 3/4" spacers from quadratec and use them in conjunction with the FT 3" coils?

Thanks

 

Yep.

You may actuall want 1" spacers if you have a steel bumper and winch.

 

You can run both. I have the FT 3" Ultimate lift and 3/4" spacers in the front. I had installed the 3/4" spacers before my lift due to my bumper and winch. I left the spacers in when we installed the lift. I am level to a slight rise in the front now as I installed my rear bumper/tire carrier.

 

no problem with the spacers!!!

 

3 inch springs and 3/4 inch spacers work great.