Thinking about doing the TF 4" flexarm lift (Rub. Unlm.) and wondering if I should go ahead and put the 1.5" body spacer on the front/rear so I am prepared down the road a bit for a heavier bumper/winch setup. Do I need it on both ends or do I need it at all with this lift? Kind of want to do it all at the same time so I don't have to take it apart 6 month down the road when I hang a new bumper on one end or the other and get a sag.

 

Anyone? Not sure wht this post dropped off the front page so fast?

Thanks

 

I would wait on the spacer lift

I would get the Jeep done and then see what you want. You may want 1.5" in the front and only 1" in the rear or something different or nothing at all.

 

How large of tires do you want to run? Sorry I missed this post ealier.

 

I think I will go with 35's and when they go bad maybe 37's

 

I will let TeraFlex confirm this but you don'r need spacers for 35's or 37's with the TF flex kit. It is a sweet ride too, you are gonna like it. If I were not so damn old that I would need a ladder to get in I would put that on mine.