I just installed a 3.25 RC lift about a week ago, and driving down the road a few days ago I heard a REALLY loud noise come from under my Jeep.. It sounded like a glass bottle bouncing off the windshield, scared the hell out of me! I pulled into a parking lot and found the front driver side sway bar link to be really loose.. When installing the lift I noticed that for some reason it wasnt allowing the nut to fully tight down onto the bolt.. There are nuts on each side of the bar, no pun intended, and everytime I tighten the nut on the left, the nut on the right pulls away from the rubber grommet on the link, causing the nut on the left to not screw on all the way..

Here are some pics




Driver Side Link (The one thats causing the problem) See how the thread is exposed, the passenger side link does not do this




Passenger Side Link (Everything is nice and snug with no thread exposed)

http://i108.photobucket.com/albums/n...r/jeepleft.jpg


MarcusRTJ advised me to just order some quick discos from Rough Country.. Im gonna go ahead and do that, but in the mean time.. Any suggestions?