First look****fox ats stabilizer****2.0 through shaft pre-order
Thread Starter
Sponsoring Vendor
ORW Representative
ORW Representative
Joined: Aug 2010
Posts: 1,759
Likes: 3
From: San Diego, Mexico, Australia
First look****fox ats stabilizer****2.0 through shaft pre-order
NOW IN STOCK!!! ORW has the first look of the new FOX ATS 2.0 STABILIZER. As FOX's largest distributor we are proud to offer you the first look of the hottest up-grade on the market. Take a look!
IN STOCK updated 2/14/2013*************IN STOCK****************IN STOCK*******************IN STOCK****************
*** FITMENT NOTICE FROM FOX DIRECT ***
2.0 Performance Series ATS Stabilizer on 2012 and newer Jeep JK.
Part Numbers Effected:
- 2.0 Performance Series ATS Stabilizer - Stock Tie-Rod: 983-02-070
- 2.0 Performance Series ATS Stabilizer - 1-5/8” Tie Rod: 983-02-088
If installing stabilizer on 2012 and newer model with stock suspension or with less than a 2.5’’ lift and aftermarket 1 1/4’’ bump stop extension, the stabilizer reservoir must be rotated for clearance. Loosen pinch bolt on L-bracket between stabilizer and track bar clamp, rotate reservoir approximately 135 degrees down and toward rear of vehicle.
We have updated the installation manual and will begin to include these in newly packaged stabilizers.
IN STOCK updated 2/14/2013*************IN STOCK****************IN STOCK*******************IN STOCK****************
*** FITMENT NOTICE FROM FOX DIRECT ***
2.0 Performance Series ATS Stabilizer on 2012 and newer Jeep JK.
Part Numbers Effected:
- 2.0 Performance Series ATS Stabilizer - Stock Tie-Rod: 983-02-070
- 2.0 Performance Series ATS Stabilizer - 1-5/8” Tie Rod: 983-02-088
If installing stabilizer on 2012 and newer model with stock suspension or with less than a 2.5’’ lift and aftermarket 1 1/4’’ bump stop extension, the stabilizer reservoir must be rotated for clearance. Loosen pinch bolt on L-bracket between stabilizer and track bar clamp, rotate reservoir approximately 135 degrees down and toward rear of vehicle.
We have updated the installation manual and will begin to include these in newly packaged stabilizers.
Last edited by ORWJK; Jan 20, 2014 at 09:43 AM.
JK Newbie
Joined: Dec 2011
Posts: 89
Likes: 0
From: Chicago, Illinois
Shit!!!!! I just ordered and installed a fox stabilizer and am not too happy with the push it gives to the left. Great timing eh. PM me a price please to 60062. Will this work with the Synergy suspension relocation bracket and tie rod clamp for a 2012 Jk? Looks like it does not need any additional clamp or bracket.
Last edited by rcohen1122; Nov 30, 2012 at 05:58 PM.
