Alpha Expedition: Tom Wood's Drive Shafts
Hey guys.
Both Alpha Expedition vehicles and friends of Alpha Expedition have been using Tom Woods drive shafts for many years, and we agree that Woody really knows his shaft! :D They offer great customer service and the best quality products on the market. Alpha Expedition is proud to pass on these great products and offer the best drive shafts to our customers. 1310 Series Drive Shafts (each): $449 Shipped 1350 Series Drive Shafts (each): $649 Shipped [SIZE="3"][B] *** All drive shafts come with black finish. Additional $35 per shaft for Polished & Clear coated *** http://4xshaft.com/images/JK_FrtRear.jpg How To Order: Please provide the F/R measurement(s), the model of your JK, & type of the axle you have & send an E-mail or Paypal to dtung@alphaexpedition.com Tom Wood can build the either drive shaft in 1310 or 1350 series. Unless you plan on beating the vehicle really hard, the believe the 1310 series front drive shaft would serve most people well. Likewise for the rear drive shaft. Instructions: Please follow the photo instructions below for correct messurment(s) Front http://4xshaft.com/images/JK_MeasFrt1.jpg Rear http://4xshaft.com/images/JK_MeasRear1.jpg “GOLD SEAL” Universal Joint come with every TW shafts you order!!! Using high industry test standards, these universal joints exceeded manufacturers’ load, life and strength requirements. The joint also features an easy access grease fitting. http://4xshaft.com/images/u_joint-gold_seal_300x281.jpg Installation: Installation is a simple bolt in. You should have available for possible use; an impact wrench capable of delivering 180 LB/FT torque. Box end wrenches of the following sizes 1/2”, 7/16” & 18MM along with a 1-1/4” socket. *** Above price are for lower 48 states only. Please contact me for total quotes if you live outside of the the lower 48 states. *** A photo of TW shafts in action:) http://i349.photobucket.com/albums/q...8/DSC02073.jpg |
Very cool :yup:
|
He is the best! Had a Woody on my TJ and wouldn't consider anything else for the JK. Hey Dave, you've wheeled with me a few times...would I be Ok with the 1310 going up to 37s? I'm hoping to order by June.
|
Originally Posted by kidjeep
(Post 1004300)
He is the best! Had a Woody on my TJ and wouldn't consider anything else for the JK. Hey Dave, you've wheeled with me a few times...would I be Ok with the 1310 going up to 37s? I'm hoping to order by June.
I have 1310 front and rear TW shafts 1310 would fit your needs. The reason I say that is because the 1350 joints have much more strength and you would need the 1350 if you have 9", 14 bolts, D60 & etc . Or else you would be risking higher chance of breaking your other expensive drive train parts, like ring & pinions. Remember, when you strength up one, you will create a weaker point else where. And it is up to the owner to decide which part(s) they rather break IF breaks.:brows: And personally I would rather to break my $20 1310 u joints all the day long... :yup: |
Yeah good point...forget 60s, I'll go right to Rockwells!
|
Got my TW Front DS in from David about 2-weeks ago :thumbsup:
|
Originally Posted by R8R ROK
(Post 1004793)
I will be calling you when I am ready.
Originally Posted by kidjeep
(Post 1004790)
Yeah good point...forget 60s, I'll go right to Rockwells!
Originally Posted by Gokracer1
(Post 1005164)
Got my TW Front DS in from David about 2-weeks ago :thumbsup:
|
Originally Posted by MBATF
(Post 1003499)
|
Just ordered
My rampage will get those infamous Tom Wood's DriveShaft via Alpha Expedition!!! :bleh:
Can hardly wait go back to MOAB!!!! again :bleh: |
Originally Posted by rampage
(Post 1009544)
My rampage will get those infamous Tom Wood's DriveShaft via Alpha Expedition!!! :bleh:
Can hardly wait go back to MOAB!!!! again :bleh: Rampge. I might stay extra days to wheel with you guys.:) |
All times are GMT -8. The time now is 12:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands