DynoMax Performance Exhaust spring rebate is here!
#1
Sponsoring Manufacturer
Thread Starter
DynoMax Performance Exhaust spring rebate is here!
Now is the time to get that sound you want for your vehicle!!
Check with your favorite retailer on pricing.
Link below for all the info.
NOW EXTENDED UNTIL AUGUST 31, 2016!!!!
DynoMax® Performance Exhaust Promotions
Tips to Ensure Timely Processing of Rebates:
Carefully review all Terms and Conditions on the back of the rebate form.
Check that each product purchased is listed in the “Qualifying Products / Series” section on the back of the rebate form.
Fill out each rebate form completely before mailing. Do not submit a rebate form with fields left blank.
Include all documentation requested on the rebate form, including a completed rebate form and authentic dated sales receipt. (If products were purchased online, please also include the UPC symbols cut from the packaging of all qualifying products.) Rebates will not be processed without supporting documentation.
Follow posted promotion and postmark dates. Submissions must be postmarked by September 30, 2016. Early or late submissions will not be accepted.
Check with your favorite retailer on pricing.
Link below for all the info.
NOW EXTENDED UNTIL AUGUST 31, 2016!!!!
DynoMax® Performance Exhaust Promotions
Tips to Ensure Timely Processing of Rebates:
Carefully review all Terms and Conditions on the back of the rebate form.
Check that each product purchased is listed in the “Qualifying Products / Series” section on the back of the rebate form.
Fill out each rebate form completely before mailing. Do not submit a rebate form with fields left blank.
Include all documentation requested on the rebate form, including a completed rebate form and authentic dated sales receipt. (If products were purchased online, please also include the UPC symbols cut from the packaging of all qualifying products.) Rebates will not be processed without supporting documentation.
Follow posted promotion and postmark dates. Submissions must be postmarked by September 30, 2016. Early or late submissions will not be accepted.
Last edited by Dynomax; 05-26-2016 at 09:24 AM.
#3
JK Newbie
Join Date: Feb 2016
Location: Boiling Springs, PA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
39535
QUIETCRAWLER™ - SINGLE - 2.5" CAT-BACK SYSTEM - ULTRA FLO™ POLISHED MUFFLER
Are you going to produce theSe quiet crawler systems for '07-'11 / 3.8 JKU's?
Put one together for me and i'll buy it now.
#4
Sponsoring Manufacturer
Thread Starter
So at this time I am not aware of us making one for the 3.8, that being said, the main difference between the 3.6 and 3.8 is where the hanger is located.
#5
JK Newbie
Join Date: Feb 2016
Location: Boiling Springs, PA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Is the inlet on the ultra flow muffler in your kit the same as the 3.8? Your specs for the 3.6 indicates a 3" inlet. Other than the hangar, do you think it'll bolt up to a JKU 3.8 cat?
I suppose I could just buy the components and make a similar set up.
I suppose I could just buy the components and make a similar set up.
#6
Sponsoring Manufacturer
Thread Starter
Both the 3.8 and 3.6 use a 2.5" in/out. I "think" it will bolt up. My boss did this on his 2011 3.8 and I don't recall him having any other issues.
Here are the PN's too:
PN 17283 DynoMax Ultra Flo Welded
PN 242245 Resonator (Race Bullet)
PN 52561 Intermediate pipe.
PN 55428 tail pipe
2.5" clamps.
What guys have done is make this a "pre-dump" too
What you need is a piece of 2.5" too to place between the two mufflers, about 8-10"
Here are the PN's too:
PN 17283 DynoMax Ultra Flo Welded
PN 242245 Resonator (Race Bullet)
PN 52561 Intermediate pipe.
PN 55428 tail pipe
2.5" clamps.
What guys have done is make this a "pre-dump" too
What you need is a piece of 2.5" too to place between the two mufflers, about 8-10"
Trending Topics
#8
JK Enthusiast
Well... it seems like the exhaust promotion is doing well. Jegs.com sent me a email stating the exhaust is out of stock and on backorder with a estimated ship date of April 18th...