2012 Auto? MUST READ-Trans line rub causes leaks!
#11
JK Enthusiast
Thread Starter
Join Date: Jul 2011
Location: New Hampshire
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
This is YOUR picture #4 with a red arrow for where you need to look. If they are not touching any other silver lines then you are likely good to go.
EVERYONE SHOULD SKIP LOOKING AT MY PICTURES AND JUST CHECK INSDE THEIR DRIVERS SIDE WHEEL WELL AND COMPARE TO THE ABOVE PICTURE WITH THE RED ARROW.
(My service tech must have repositioned those two electrical conduits and tied them to the frame with a cable tie therefore blocking my view. Everyone else should have a clear view of the lines by pulling back the wheel well plastic shell.)
#12
This is YOUR picture #4 with a red arrow for where you need to look. If they are not touching any other silver lines then you are likely good to go.
Attachment 337682
EVERYONE SHOULD SKIP LOOKING AT MY PICTURES AND JUST CHECK INSDE THEIR DRIVERS SIDE WHEEL WELL AND COMPARE TO THE ABOVE PICTURE WITH THE RED ARROW.
(My service tech must have repositioned those two electrical conduits and tied them to the frame with a cable tie therefore blocking my view. Everyone else should have a clear view of the lines by pulling back the wheel well plastic shell.)
Attachment 337682
EVERYONE SHOULD SKIP LOOKING AT MY PICTURES AND JUST CHECK INSDE THEIR DRIVERS SIDE WHEEL WELL AND COMPARE TO THE ABOVE PICTURE WITH THE RED ARROW.
(My service tech must have repositioned those two electrical conduits and tied them to the frame with a cable tie therefore blocking my view. Everyone else should have a clear view of the lines by pulling back the wheel well plastic shell.)
Thanks, I'll take a closer look !!
Edit----just looked, I can easily pass my fingers thru there. I think I'll put some pipe insulation there to be safe though. Thanks for catching this and letting everyone know.
Last edited by jkrubcon; 07-05-2012 at 06:30 PM.
#13
JK Newbie
Join Date: Jun 2012
Location: Crawfordville, Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
We fell victim to this design flaw as well...good thing Chrysler fixed it under warranty. Only cost me two extra unwanted days with the in-laws, we were visiting when it happened.
#17
JK Enthusiast
Thread Starter
Join Date: Jul 2011
Location: New Hampshire
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
[
Good to know many are showing up ok.
Originally Posted by QUIKSILVERZ
just checked my 02/12 build jku and the lines do not touch at all. Thanks for the heads up for all of us 12 owners.
#19
JK Enthusiast
Thread Starter
Join Date: Jul 2011
Location: New Hampshire
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bdmckenna
I checked mine and it looks different then what you have. Thank you for all the detailed information.
#20
JK Enthusiast
Join Date: Jul 2012
Location: Toronto Ontario
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Will be checking Mine later today! Had issues with my factory soft top and they had to replace it for me twice! Dont like losing jeep for a day or more to the dealer. Thanks for the info!!