Help with Mopar fog light wiring
02-23-2015, 05:58 AM
#1
JK Newbie
Thread Starter
Join Date: Nov 2008
Location: Los Angeles, CA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Help with Mopar fog light wiring
Hi all,
I'm wiring up the Mopar fog light kit on my '08 X. Everything was going smoothly till it came time to put in the wiring harness. I broke one of the posts on my TIPM bracket, and the D-connector underneath the TIPM won't disconnect for love or money. I gave up because I didn't want to break anything. It's on there so tight it seems like there has to be some kind of trick to this. I feel like an idiot for asking, but what am I missing? It's the connector on the right side of the photo, with the red tab.
I'm wiring up the Mopar fog light kit on my '08 X. Everything was going smoothly till it came time to put in the wiring harness. I broke one of the posts on my TIPM bracket, and the D-connector underneath the TIPM won't disconnect for love or money. I gave up because I didn't want to break anything. It's on there so tight it seems like there has to be some kind of trick to this. I feel like an idiot for asking, but what am I missing? It's the connector on the right side of the photo, with the red tab.
02-23-2015, 06:27 AM
#2
JK Jedi Master
You have the red tab pulled down. The next step is squeeze the gray tab while wiggling the connector out of the socket. Squeeze the gray tab enough to make it bend toward the red tab under it.
Last edited by ronjenx; 02-23-2015 at 06:31 AM.
