P0365
 

I have a 2016 Jeep Wrangler Unlimited Sport with about 75000 miles. Jeep started acting funny. It would crank but have trouble starting. Then yesterday I started the jeep just fine in the morning but by 2:30 yesterday afternoon it would crank but not start at all. Scanned and got codes P0128 & P0365. I Changed the thermostat without issue. The camshaft position sensor code said Bank 1 Sensor 2. I did change the CPS on the passenger side but still just cranks and no start. Should I change both CPS's. Other ideas, Any advice will help.

Did you replace with a mopar sensor? Did you replace the crank position sensor as well? It's pretty difficult to inspect the wiring going to those cam sensors due to their location but I think I'd be trying to take a close look at the wiring to make sure there's no obvious short.