Stock Rubicon Rubbing
 

So was messing around in some local dirt yesterday, playing with maxing out the articulation, and I noticed that with the sway bar disconnected I'm getting some rubbing on the front inner fender liners at full flex. It's not much, just barely brushing really, and not an actual concern, but I do have aftermarket flares and inners on the front end that I'm pretty sure provide better clearance than stock. I'm just wondering if anyone else with a stock Rubicon gets a little tire contact on the front end with the sway bar disconnected, or if I need to take a hammer to my inners for some extra room?

I can't recall what inner liners you put on, but I think most aftermarket inners will have a tiny bit less clearance than the factory plastic liners.

That's ok, I have no idea what they are either... I got them as a straight swap for my stock fenders and liners, and they're at least a cosmetic improvement. They are metal though, so I think I can bend a little more clearance out of them. Thanks, good to know!