Dynatrac ProRock 44 to replace the 30 in front??
#14
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,465
Likes: 0
Received 162 Likes
on
154 Posts
As another viewpoint to all the folks having no problems with their 30's:
Mine was bent with On-Road driving. 6-7 hours labor just to straighten, then new gears since they were toast, and sleeves/gussets, and offests if the C was still bent. So, fix the 30, or upgrade to a PR?
And here is a recent thread with a stock sahara running 32's that drove up onto a curb. Ouch!!
https://www.jk-forum.com/forums/show...on-please-help!!!!
The PR44 is a HUGE improvement over these stock axles. Everyone that says they have not had issues with them needs to add (yet) to their statements. And one simple question for you all. How do you 'know' that it isn't bent already? I'm guessing that a lot of you just don't know it (yet)...
If you can't afford to upgrade, then at least do what you can to strengthen your stock housings. Gussets and sleeves won't give the strength of a PR, but it's a lot better than stock.
Mine was bent with On-Road driving. 6-7 hours labor just to straighten, then new gears since they were toast, and sleeves/gussets, and offests if the C was still bent. So, fix the 30, or upgrade to a PR?
And here is a recent thread with a stock sahara running 32's that drove up onto a curb. Ouch!!
https://www.jk-forum.com/forums/show...on-please-help!!!!
The PR44 is a HUGE improvement over these stock axles. Everyone that says they have not had issues with them needs to add (yet) to their statements. And one simple question for you all. How do you 'know' that it isn't bent already? I'm guessing that a lot of you just don't know it (yet)...
If you can't afford to upgrade, then at least do what you can to strengthen your stock housings. Gussets and sleeves won't give the strength of a PR, but it's a lot better than stock.
#15
Sponsoring Manufacturer
FWIW- We just had a customer with 10K street miles on his stock JK. ZERO miles off road. He went in for new ball joints and the shop found the 'C's bent already.
#16
JK Super Freak
Join Date: Mar 2010
Location: San Marcos, CA
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
I assume he\she decided against using the factory warranty for repairs or was he\she on the mods list and denied a claim ?
#17
Sponsoring Manufacturer
#19
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,465
Likes: 0
Received 162 Likes
on
154 Posts
11. Is the ProRock 44 available with a Dana 60 wheel end?
Yes, the ProRock 44 is available with a Dana 60 wheel end. There are several advantages including larger axle shafts, u-joints, ball joints, and a true locking manual hub. These configurations are made to order and sold as a custom assembly. Please contact a Dynatrac sales representative for additional information.
Yes, the ProRock 44 is available with a Dana 60 wheel end. There are several advantages including larger axle shafts, u-joints, ball joints, and a true locking manual hub. These configurations are made to order and sold as a custom assembly. Please contact a Dynatrac sales representative for additional information.
17. Can I get a ProRock 44 axle with a half ton truck style wheel end and a locking hub?
Yes, we have built ProRock 44 Axle assemblies with a traditional full size pickup Dana 44 steering knuckle, spindle and hub. These axle assemblies are sold as custom builds on a made to order basis. Please contact a member of the Dynatrac sales staff for additional information if you are interested in one of these assemblies.
Yes, we have built ProRock 44 Axle assemblies with a traditional full size pickup Dana 44 steering knuckle, spindle and hub. These axle assemblies are sold as custom builds on a made to order basis. Please contact a member of the Dynatrac sales staff for additional information if you are interested in one of these assemblies.
Last edited by nthinuf; 02-08-2011 at 02:48 PM.