Looking for non-beadlock wheels with removable outer ring
#1
JK Newbie
Thread Starter
Join Date: Dec 2013
Location: Manassas, VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Looking for non-beadlock wheels with removable outer ring
Does anyone know of a company that makes non-beadlock wheels, but still have the removable outer ring? Basically a simulated beadlock. I'd like something to protect the wheel itself, but if/when it takes a beating I can just replace/repaint the ring.
I know Trailready makes the "Beadlook" wheels, but they're around $400 each.
EDIT: Aluminum wheels available in 17"
I know Trailready makes the "Beadlook" wheels, but they're around $400 each.
EDIT: Aluminum wheels available in 17"
Last edited by AR15gunner; 01-17-2014 at 04:50 AM.
#3
JK Newbie
Thread Starter
Join Date: Dec 2013
Location: Manassas, VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I'm not a huge fan of the Rugged Ridge wheels.
I'm a little confused about the Mickey Thompson Classic Baja Lock Wheels though. They say the rings are not removable, but then I found these rings that clearly state they are for "simulated beadlock wheels." What MT wheels do these go on?
Mickey Thompson Lock Rings - Quadratec
I'm a little confused about the Mickey Thompson Classic Baja Lock Wheels though. They say the rings are not removable, but then I found these rings that clearly state they are for "simulated beadlock wheels." What MT wheels do these go on?
Mickey Thompson Lock Rings - Quadratec
#4
It looks like these may be removable.
NV | Matte Black Off-road Wheel | Method Race Wheels
http://www.methodracewheels.com/coll...ts/nv-machined
NV | Matte Black Off-road Wheel | Method Race Wheels
http://www.methodracewheels.com/coll...ts/nv-machined
Last edited by olyelr; 01-17-2014 at 05:32 AM.
#6
JK Newbie
Thread Starter
Join Date: Dec 2013
Location: Manassas, VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
I've been looking for the last few days and think I may have finally answered my own question. I found the Mickey Thompson Classic Lock Wheels, but can't find them in the correct bolt pattern for the JK.
Mickey Thompson Performance 1379481 - Mickey Thompson Classic Lock Wheel in Black with 8x6.5" Bolt Pattern in 17x9 Size & 5" Backspacing - Quadratec
So I guess I'm back to looking for other suggestions. Anyone?
Mickey Thompson Performance 1379481 - Mickey Thompson Classic Lock Wheel in Black with 8x6.5" Bolt Pattern in 17x9 Size & 5" Backspacing - Quadratec
So I guess I'm back to looking for other suggestions. Anyone?
Last edited by AR15gunner; 01-17-2014 at 05:59 AM.
#7
JK Super Freak
Join Date: Jun 2010
Location: Tampa/Lutz, FL
Posts: 1,297
Likes: 0
Received 0 Likes
on
0 Posts
Check out OMF Wheels they can take any wheel and make it into a simu-lock wheel and they have some pretty bad ass designs. I have Trail ready beadlocks myself and I love the fact that I can beat the heck out of the rings knowing that I can always paint them and make the wheels look new again.
This is an OMF design not an actual beadlock and not my wheels
These are real beadlocks and my wheels and you can see they are pretty close
Good luck.
This is an OMF design not an actual beadlock and not my wheels
These are real beadlocks and my wheels and you can see they are pretty close
Good luck.
Trending Topics
#8
I have the Mickey Thompson .... 8 screws they come right off(I painted mine) ..... The other screws(bolts are for show and stay on the ring but are removable). If you're interested in them contact Mickey Thompson they might still have some kicking around if they did discontinue the removable ones... Good luck
#9
JK Newbie
Thread Starter
Join Date: Dec 2013
Location: Manassas, VA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Just got off the phone with Mickey Thompson and they closed the plant where the Classic Lock Wheels were being produced and are no longer making them. They said they're getting a ton of calls about them, so hopefully they'll start making them again someday, but that doesn't help me now.