2.5'' BB + 1'' body lift + 35''
06-04-2009, 07:04 PM
#1
JK Newbie
Thread Starter
Join Date: Feb 2008
Location: Quebec city
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
2.5'' BB + 1'' body lift + 35''
anyone?
maybe a re-ask but I didn't found any ....
xuor
(oups wrong section... may an admin move this in the show and tell section? thx)
maybe a re-ask but I didn't found any ....
xuor
(oups wrong section... may an admin move this in the show and tell section? thx)
06-04-2009, 07:51 PM
#3
JK Newbie
Thread Starter
Join Date: Feb 2008
Location: Quebec city
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
06-04-2009, 08:13 PM
#4
JK Freak
Don't have pics. But you don't need the body lift. The 2.5" BB will allow you to both dd and wheel with 35's. You WILL however need either wheel spacers or aftermarket wheels with 4.5" or less of backspacing.
The only time you'll rub is if you disco your swaybar, with quick disconnects, then you might get some rubbing at full lock against your discoed swaybar links.
The only time you'll rub is if you disco your swaybar, with quick disconnects, then you might get some rubbing at full lock against your discoed swaybar links.
06-05-2009, 10:29 AM
#5
JK Super Freak
Join Date: May 2008
Location: Vancouver, BC/Kingston, ON
Posts: 1,532
Likes: 0
Received 0 Likes
on
0 Posts
I haven't found the need to re-gear, but I have the rubi tcase so that makes it a bit better, i'm not sure if you have a rubi or not.
my rig with 2.5" TF coil lift, and 1" PA body lift:
my rig with 2.5" TF coil lift, and 1" PA body lift:
Last edited by 07Rubi2dr; 06-05-2009 at 10:33 AM.
Trending Topics
06-06-2009, 10:28 AM
#10
JK Newbie
Join Date: Jan 2009
Location: San Antonio, Texas
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts