NEW SPONSOR: Prodigy Performance JK Turbo Kits
#31
JK Enthusiast
Join Date: Aug 2007
Location: Aurora, IL
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Hello Nelly, I have a 07 JKU rubicon with 3.5 Rk mid arm lift and 35 inch MTR'Ks with the stock 4:10's witch seem to be perfect now. I have to say I have not tried the cruise control because it is to fun to hit the skinny peddle, but I will check that next time I drive it.
#33
JK Enthusiast
Join Date: Aug 2009
Location: Hoodbridge, Va
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
This seems pretty exciting. The only things that concern me is the longevity (which has already been mentioned) and the fact that it's for "off road use only". Hopefully you guys will be able to get it to where it will pass emissions and be street legal...Unless I miss understood the site.
Looking forward to seeing how this turns out!
Looking forward to seeing how this turns out!
#37
That turbo looks to be a GT35r. If so, I run the same one on my 2.0L and it is making over 500 awhp on pump gas.
I would suspect at 8psi it will last a VERY long time.
Also, I would run this turbo blanket, it dropped my under-hood temps 100deg. Ceramic coat the down pipe even more.
amazon.com/dp/B002R4XM1Q/ref=asc_df_B002R4XM1Q1946505?smid=ATVPDKIKX0DER&ta g=hyprod-20&linkCode=asn&creative=395093&creativeASIN=B002R 4XM1Q&hvpos=none&hvexid=&hvnetw=g&hvrand=158321268 8600117000&hvpone=&hvptwo=&hvqmt=
Watching this thread. Nice work.
I would suspect at 8psi it will last a VERY long time.
Also, I would run this turbo blanket, it dropped my under-hood temps 100deg. Ceramic coat the down pipe even more.
amazon.com/dp/B002R4XM1Q/ref=asc_df_B002R4XM1Q1946505?smid=ATVPDKIKX0DER&ta g=hyprod-20&linkCode=asn&creative=395093&creativeASIN=B002R 4XM1Q&hvpos=none&hvexid=&hvnetw=g&hvrand=158321268 8600117000&hvpone=&hvptwo=&hvqmt=
Watching this thread. Nice work.
Last edited by Sharkey; 03-22-2012 at 06:32 PM.
#38
JK Newbie
Join Date: Dec 2010
Location: Ft.Pierce Florida
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Greg you are going to one one Happy Jeeper. I was also concerned about the underhood temps and Prodigy had a custom turbo blanket made for me that looks great and will keep fingers/hands off of the hot turbo, it also looks good!
#39
JK Enthusiast
Join Date: Aug 2011
Location: Olympia, Wa.
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Yeah...I mentioned to Wes that I wanted a Blanket....The Prodigy Team
Has been great to work with!!
Nothing But Happy!
G