Jeep Speed Shop Builds and GuineaPigs
12-07-2013, 08:10 PM
#1
Former Vendor
Thread Starter
Jeep Speed Shop Builds and GuineaPigs
We are going to show some of our LS swaps and our Hemi swaps, we are also working on interior racks for the 2 door and the 4 door Jeep JK's.
At Jeep Speed Shop all we work on is Jeeps, so we are going to show some of our Jeep protects.
We are going to start off with the Shop Jeep 2008 JK 2 door know has the GuineaPig. This Jeep has a 2010 Chevrolet 6.2L/6L80, Atlas T Case, DynaTrac Axles, A three link front suspension we build and a dual triangle four link in the rear also using a TJ gas tank, York on board air system using our LS mount, Premier power welder, on board shower we build also, interior racks, ORO front sway bar, T&T front bumper, Genright fenders, TeraFlex tire carrier.
At Jeep Speed Shop all we work on is Jeeps, so we are going to show some of our Jeep protects.
We are going to start off with the Shop Jeep 2008 JK 2 door know has the GuineaPig. This Jeep has a 2010 Chevrolet 6.2L/6L80, Atlas T Case, DynaTrac Axles, A three link front suspension we build and a dual triangle four link in the rear also using a TJ gas tank, York on board air system using our LS mount, Premier power welder, on board shower we build also, interior racks, ORO front sway bar, T&T front bumper, Genright fenders, TeraFlex tire carrier.
Last edited by JSS; 12-07-2013 at 08:14 PM.
12-22-2013, 08:10 AM
#6
Former Vendor
Thread Starter
LS in a JK
This is a 2007 Jeep JK we put a LS in and got to pass Emissions, This Jeep has a 5.3L and a 6L80.
On all of our LS conversions we do not reuse wiring, the wiring we use on the engine and the conversion is all NEW. We are also trying to keep the LS conversion all LS, like the accessory drive system, cruise, AC, also we will be releasing a all new shaft so we can reuse the Rubicon T Case!
On all of our LS conversions we do not reuse wiring, the wiring we use on the engine and the conversion is all NEW. We are also trying to keep the LS conversion all LS, like the accessory drive system, cruise, AC, also we will be releasing a all new shaft so we can reuse the Rubicon T Case!
Trending Topics
01-10-2014, 05:40 PM
#10
Former Vendor
Thread Starter
LS/HEMI in a JK
We use new and used engines, It can get hard to find good used engines and the new engines come with a warranty. We are working on a all new LS kit right now, so you can use the Rubicon T Case.
The thing about our kit is we use all new wiring and the LS accessory drive so you can run a York air compressor.
To get your Jeep threw the Referee program it is a lot of work but we have done it many times. We can get any Jeep threw the program but it has to be set up right and we can help get it done!
We have probably help get more Jeeps threw the Referee program than any one.
The thing about our kit is we use all new wiring and the LS accessory drive so you can run a York air compressor.
To get your Jeep threw the Referee program it is a lot of work but we have done it many times. We can get any Jeep threw the program but it has to be set up right and we can help get it done!
We have probably help get more Jeeps threw the Referee program than any one.