What have you done to your Jeep today?
#41
JK Super Freak
New lift. Easily gonna clear 37's. Drives and rides great. Need to recenter my steering wheel so ESP/bas lights go away. I will be adding front lower control arms in the near future. It is not an emergency part addition, it's just a little twitchy. I'll be adding both upper and lower rear arms to move the axle back about an inch as well.
I would highly recommend this setup. Fantastic riding kit. I also left 1 inch spacers on top of all my coils. I didn't mean to but my mechanic has it all buttoned up before I found out. Oh well bigger lift sounds good to me.
I would highly recommend this setup. Fantastic riding kit. I also left 1 inch spacers on top of all my coils. I didn't mean to but my mechanic has it all buttoned up before I found out. Oh well bigger lift sounds good to me.
#43
JK Freak
Thread Starter
Join Date: Sep 2007
Location: Moncton, New Brunswick
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Blazen.... just curious if you had to replace ball joints or anything because of the welding involved? Lookin beefy there now!
Holy WOW Mike!!!!!! SSSwwwweeeeeeeeeeeettttttt Like Rick said... can't wait to see this bad boy in person!
Holy WOW Mike!!!!!! SSSwwwweeeeeeeeeeeettttttt Like Rick said... can't wait to see this bad boy in person!
#45
JK Freak
Thread Starter
Join Date: Sep 2007
Location: Moncton, New Brunswick
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
LOL...
Changed the oil in the JK and the Cobalt and if Elaine's car was home would have been the civic too.... I gotta change the service cycles lol.
Got a little rattle happening between 2 and 3 thousand rpm..... clutch in/clutch out doesn't matter..... sounds like a heat shield but I crawled all over it and can't find it? Anyone interested in getting strapped to the underside of the Jeep and going for a spin
Changed the oil in the JK and the Cobalt and if Elaine's car was home would have been the civic too.... I gotta change the service cycles lol.
Got a little rattle happening between 2 and 3 thousand rpm..... clutch in/clutch out doesn't matter..... sounds like a heat shield but I crawled all over it and can't find it? Anyone interested in getting strapped to the underside of the Jeep and going for a spin
#47
JK Freak
Thread Starter
Join Date: Sep 2007
Location: Moncton, New Brunswick
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
You too hunh.... I guess it's more pronounced under load but when rolling I can get it to do it with the clutch in and reving the engine too.... not as bad but enough to hear a faint quick rattle.... definitely more pronounced under load though.
Hope it's nothing... you have a new tranny in yours already!!!?
Hope it's nothing... you have a new tranny in yours already!!!?
#48
You too hunh.... I guess it's more pronounced under load but when rolling I can get it to do it with the clutch in and reving the engine too.... not as bad but enough to hear a faint quick rattle.... definitely more pronounced under load though.
Hope it's nothing... you have a new tranny in yours already!!!?
Hope it's nothing... you have a new tranny in yours already!!!?
#49
JK Enthusiast
Join Date: Jun 2010
Location: Gander, Newfoundland
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Tonight/tomorrow I am considering pulling off the bug deflector and shopping for offroad lights on the windshield...
putting me with vehicle electrical could be dangerous, though.
putting me with vehicle electrical could be dangerous, though.
#50
JK Freak
Thread Starter
Join Date: Sep 2007
Location: Moncton, New Brunswick
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Got a new set of booties on her...... 35" Goodyear MTR's with kevlar..... all I can say is..... ME LIKEY
Also picked up a new winch and hopefully and new front bumper and fog lights will follow!
Also picked up a new winch and hopefully and new front bumper and fog lights will follow!