2014 JKR Wrangler Rubicon, 3" lift, tons of great parts, well built $32,000/offer
08-16-2015, 11:19 AM
#1
JK Newbie
Thread Starter
Join Date: May 2014
Location: Omaha, NE
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
2014 Wrangler Rubicon, 3" lift, Synergy, RK, Yukon, Coast, AEV, Warn $32,000/offer
Black/black interior. 11,100 Miles, excellent condition and meticulously maintained. Built with the goal of maintaining factory functionality and reliability with the benefit of greatly improved off road capability. Project goals were a total success. 6 Speed transmission, factory hardtop also with Bestop Supertop NX Twill soft retractable sunrider top that was new this spring. AEV Salta wheels in black installed 3 months ago along with Goodyear 315/70/17 Duratracs - 3000 miles on them, just rotated. Speedometer corrected for tire size and gearing with Superchips Flashcal #3570 which has been upgraded to have engine tuning options. Synthetic oil and filter changed regularly and most recently at 11,000.
Suspension: Synergy drag link flip and track bar relocation, Synergy DOM one-ton tie rod, brand new Synergy ball joints, Synergy dual durometer fixed lower control arms, Johnny Joint adjustable upper control arms, OME steering stabilizer relocated above the tie rod. Rock Krawler Sway Bar endlinks, 2.5" Rock Krawler springs with Rock Krawler bomb-proof track bars, front urethane track bar bushing recently replaced. Bilstein 5100 shocks front/rear with rear shock mounts relocated and adjustable. Suspension adjusted until Front and rear shocks both use a safe 10.5" of the available 11" of shock travel.
Drivetrain: Armored Teraflex diff covers and ARB axle vent kit for safety. Front Diff wiring has been extended professionally by R&G Service using solder joints instead of crimp connectors. Coast 1310 CV driveshafts with Spicer Life U-Joints and CVs front/rear, 4.88 Yukon gears professionally installed by Octane Garage. Front Axle gusseted and sleeved. Electronic Sway bar and differentials engage, disengage and function with no issues.
Body: Poison Spyder Steel Crusher flares powdercoat primed and bedlined for easy touchup. Warn XD9000I with cover installed on Smittybilt XRC Mod front bumper. No frays in the cable. Smittybilt XRC Mod rear bumper with tire carrier.
Interior: Quadratec rubber floor mats, Trek Armor front/rear seat covers. Balance of factory warranty applies (Purchased new 16 months ago). Comes with stock control arms and stock bumpers. We drove it to Colorado in July and used it for a week on the trails, and drove home with no issues whatsoever. It's truly set up to use and is loaded with top-quality parts. This Jeep handles great and tracks straight. It needs absolutely nothing but a driver, I'm selling because I won't have time to use it until next year. Never been driven in road salt. Clear Nebraska title in hand. Book value of $33,641, plus over $11,500 in parts alone. $32,000/offer. Located in Omaha, NE. 68135.
Suspension: Synergy drag link flip and track bar relocation, Synergy DOM one-ton tie rod, brand new Synergy ball joints, Synergy dual durometer fixed lower control arms, Johnny Joint adjustable upper control arms, OME steering stabilizer relocated above the tie rod. Rock Krawler Sway Bar endlinks, 2.5" Rock Krawler springs with Rock Krawler bomb-proof track bars, front urethane track bar bushing recently replaced. Bilstein 5100 shocks front/rear with rear shock mounts relocated and adjustable. Suspension adjusted until Front and rear shocks both use a safe 10.5" of the available 11" of shock travel.
Drivetrain: Armored Teraflex diff covers and ARB axle vent kit for safety. Front Diff wiring has been extended professionally by R&G Service using solder joints instead of crimp connectors. Coast 1310 CV driveshafts with Spicer Life U-Joints and CVs front/rear, 4.88 Yukon gears professionally installed by Octane Garage. Front Axle gusseted and sleeved. Electronic Sway bar and differentials engage, disengage and function with no issues.
Body: Poison Spyder Steel Crusher flares powdercoat primed and bedlined for easy touchup. Warn XD9000I with cover installed on Smittybilt XRC Mod front bumper. No frays in the cable. Smittybilt XRC Mod rear bumper with tire carrier.
Interior: Quadratec rubber floor mats, Trek Armor front/rear seat covers. Balance of factory warranty applies (Purchased new 16 months ago). Comes with stock control arms and stock bumpers. We drove it to Colorado in July and used it for a week on the trails, and drove home with no issues whatsoever. It's truly set up to use and is loaded with top-quality parts. This Jeep handles great and tracks straight. It needs absolutely nothing but a driver, I'm selling because I won't have time to use it until next year. Never been driven in road salt. Clear Nebraska title in hand. Book value of $33,641, plus over $11,500 in parts alone. $32,000/offer. Located in Omaha, NE. 68135.
Last edited by stevewix; 08-17-2015 at 07:16 AM.
