Feeler fs 2010 jku sport
Can't believe I'm even contemplating this but here goes. 2010 jku sport with 41,000 miles. Asking $27,000. Here's a list of upgrades
-rock krawler 3 link mid arm with the new pro series crawler joints, new 3.5" triple rate springs, correction wedges and jks disconnects. Also rear evo rockstar control arm skid with raised shock mounts. Bilstien 5100 shocks with 11" travel.
-front dynatrac pro rock 44 unlimited with rcv's, Detroit tru trac, alloy USA ball joints and Yukon 5.13 gears. Also Ried racing knuckles.
-rear stock 44 with 3rd link truss, 5.13 Yukon gears, arb air locker and alloy USA chromolly shafts.
-37x12.5 Goodyear mtr's with good tread on PRO COMP Series 7069 1-Piece Flat Black Finish Alloy Wheel with 5x5 Bolt Pattern in 17x9 Size & 4.75" Backspacing.
- front 1310 coast driveshaft and rear stock drive shaft.
-rugged ridge snorkel, high and low mount
-Rock Hard 4x4 Parts Shorty Front Bumper with Lowered Winch Plate. Quadratec series 9500 winch with steel cable and 12" led light bar
-Body Armor 4x4 Swing Arm Tire Carrier in Textured Black and high clearance bumper.
-tjm oil pan skid
- very clean almost new softop. No leaks or scratches
-psc hydro assist steering and synergy tie rod and drag link.


-rock krawler 3 link mid arm with the new pro series crawler joints, new 3.5" triple rate springs, correction wedges and jks disconnects. Also rear evo rockstar control arm skid with raised shock mounts. Bilstien 5100 shocks with 11" travel.
-front dynatrac pro rock 44 unlimited with rcv's, Detroit tru trac, alloy USA ball joints and Yukon 5.13 gears. Also Ried racing knuckles.
-rear stock 44 with 3rd link truss, 5.13 Yukon gears, arb air locker and alloy USA chromolly shafts.
-37x12.5 Goodyear mtr's with good tread on PRO COMP Series 7069 1-Piece Flat Black Finish Alloy Wheel with 5x5 Bolt Pattern in 17x9 Size & 4.75" Backspacing.
- front 1310 coast driveshaft and rear stock drive shaft.
-rugged ridge snorkel, high and low mount
-Rock Hard 4x4 Parts Shorty Front Bumper with Lowered Winch Plate. Quadratec series 9500 winch with steel cable and 12" led light bar
-Body Armor 4x4 Swing Arm Tire Carrier in Textured Black and high clearance bumper.
-tjm oil pan skid
- very clean almost new softop. No leaks or scratches
-psc hydro assist steering and synergy tie rod and drag link.


Can't believe I'm even contemplating this but here goes. 2010 jku sport with 41,000 miles. Asking $27,000. Here's a list of upgrades
-rock krawler 3 link mid arm with the new pro series crawler joints, new 3.5" triple rate springs, correction wedges and jks disconnects. Also rear evo rockstar control arm skid with raised shock mounts. Bilstien 5100 shocks with 11" travel.
-front dynatrac pro rock 44 unlimited with rcv's, Detroit tru trac, alloy USA ball joints and Yukon 5.13 gears. Also Ried racing knuckles.
-rear stock 44 with 3rd link truss, 5.13 Yukon gears, arb air locker and alloy USA chromolly shafts.
-37x12.5 Goodyear mtr's with good tread on PRO COMP Series 7069 1-Piece Flat Black Finish Alloy Wheel with 5x5 Bolt Pattern in 17x9 Size & 4.75" Backspacing.
- front 1310 coast driveshaft and rear stock drive shaft.
-rugged ridge snorkel, high and low mount
-Rock Hard 4x4 Parts Shorty Front Bumper with Lowered Winch Plate. Quadratec series 9500 winch with steel cable and 12" led light bar
-Body Armor 4x4 Swing Arm Tire Carrier in Textured Black and high clearance bumper.
-tjm oil pan skid
- very clean almost new softop. No leaks or scratches
-psc hydro assist steering and synergy tie rod and drag link.



-rock krawler 3 link mid arm with the new pro series crawler joints, new 3.5" triple rate springs, correction wedges and jks disconnects. Also rear evo rockstar control arm skid with raised shock mounts. Bilstien 5100 shocks with 11" travel.
-front dynatrac pro rock 44 unlimited with rcv's, Detroit tru trac, alloy USA ball joints and Yukon 5.13 gears. Also Ried racing knuckles.
-rear stock 44 with 3rd link truss, 5.13 Yukon gears, arb air locker and alloy USA chromolly shafts.
-37x12.5 Goodyear mtr's with good tread on PRO COMP Series 7069 1-Piece Flat Black Finish Alloy Wheel with 5x5 Bolt Pattern in 17x9 Size & 4.75" Backspacing.
- front 1310 coast driveshaft and rear stock drive shaft.
-rugged ridge snorkel, high and low mount
-Rock Hard 4x4 Parts Shorty Front Bumper with Lowered Winch Plate. Quadratec series 9500 winch with steel cable and 12" led light bar
-Body Armor 4x4 Swing Arm Tire Carrier in Textured Black and high clearance bumper.
-tjm oil pan skid
- very clean almost new softop. No leaks or scratches
-psc hydro assist steering and synergy tie rod and drag link.





