i just rebuilt engine (2.5) in my wifes 94 , got it all done but now it wont start i have no cel light . im at a total loss as to what is causing this, it ran with a hole in number 4 piston, fired up every time prior to rebuild... now nothing i cant get spark or fuel up to motor. Checked all the fuses, swapped relays still nothing. found tread on ECMs and it has all the same issues related to this so i've pulled out ecm and did change out the caps but still nothing. when pulling motor we missed wires on CPS ( crank position sensor) and accidently ripped them out it took me 2 days trying to find where the wires came from finally found the problem and changed that out with new CPS.Still nothing im lost here anyone one have any ideas why this wont start. I've been looking for another computer (ECM) not one anywhere to be found I cant keep throwing money at this thing somebody PLEASE HELP THANKS in advance