JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

- JK CB & HAM Radios (https://www.jk-forum.com/forums/jk-cb-ham-radios-128/)

- - Running power wires, and coax etc. (https://www.jk-forum.com/forums/jk-cb-ham-radios-128/running-power-wires-coax-etc-7243/)

Quote:

Originally Posted by captsam54 (Post 73571)

Hi Guys...
Thought I would throw my 2 cents in on routing power wires and coax thru into the engine bay etc.

Pop the side panel off (left or right) on the dash.. Look forward and see a round hole filled with foam..

Take a Phillips screw driver and wiggle it around in there and push it threw until you feel it come out the other side..
Then you can pull wires thru without drilling the firewall etc.
If anyones interested in pictures, please go to "my" gallery, and you should be able to see pic's there..

EDIT: link to "My Gallery".... http://my.project-jk.com/showgallery.php?cat=624

I have mine wired for a VHF and a CB with a Arizoniarockyroad overhead mount..:yup:

Thanks to a tip from HG97TJ I found this post! This is exactly the info I needed to get my Cobra 75 install completed!

This forum never fails to provide awesome information to help me make my Jeep better all the time.

Quote:

Originally Posted by captsam54 (Post 73571)

I looked at every picture there and couldn't find anything. What page is it on?

Quote:

Originally Posted by 07rube (Post 166411)

I looked at every picture there and couldn't find anything. What page is it on?

http://my.project-jk.com/showgallery.php?cat=624

Follow that link to (my) Jk photo Gallery and there you will see pic's of my JK with shots of the stuff we were talking about..