Notices
JK CB & HAM Radios Bulletin board forum regarding all topics concerning CB and HAM radios, the installation of them in your Jeep JK Wrangler. This would include antenna mounts, wiring, tuning and usage.

Space to mount PA system?

Old Apr 18, 2012 | 02:50 PM
  #1  
djcamis's Avatar
Thread Starter
JK Enthusiast
 
Joined: Apr 2012
Posts: 155
Likes: 0
From: Miami,Fl
Default Space to mount PA system?

Is there a good place to mount this PA system in 2012 JK?

Hornblasters 100 Watt Public Address/PA with Sirens
Reply
Old Apr 18, 2012 | 07:30 PM
  #2  
Rooster76's Avatar
JK Enthusiast
 
Joined: Oct 2011
Posts: 419
Likes: 2
From: Indy
Default I would try the hood

I went through all the post on this CB section and this was the best one about PA horn installs.
LINK --> PA Speaker Horn Install
Reply
Old Apr 18, 2012 | 09:43 PM
  #3  
Dagley918's Avatar
JK Enthusiast
 
Joined: Aug 2011
Posts: 427
Likes: 1
From: Bentonville, AR
Default

I actually have mine attached to the stock airbox pointing down at an angle. Loud enough for a few laughs now and then.
Reply
Old Apr 25, 2012 | 09:30 AM
  #4  
djcamis's Avatar
Thread Starter
JK Enthusiast
 
Joined: Apr 2012
Posts: 155
Likes: 0
From: Miami,Fl
Default

Originally Posted by Dagley918
I actually have mine attached to the stock airbox pointing down at an angle. Loud enough for a few laughs now and then.
Which is exactly what I want it for! But has anyone tried it with that system? It seems rather slim unlike the typical horn type.
Reply
Old Apr 25, 2012 | 09:30 AM
  #5  
djcamis's Avatar
Thread Starter
JK Enthusiast
 
Joined: Apr 2012
Posts: 155
Likes: 0
From: Miami,Fl
Default

Originally Posted by Rooster76
I went through all the post on this CB section and this was the best one about PA horn installs.
LINK --> PA Speaker Horn Install
Thanks for the info!
Reply
Old Apr 25, 2012 | 11:20 AM
  #6  
Dagley918's Avatar
JK Enthusiast
 
Joined: Aug 2011
Posts: 427
Likes: 1
From: Bentonville, AR
Default

Originally Posted by djcamis

Which is exactly what I want it for! But has anyone tried it with that system? It seems rather slim unlike the typical horn type.
It is smaller that some of the other horns I've seen in the threads. The other larger horns are able to take a lot more wattage through them. I didn't want to mess with a preamp so I went with the smaller horn knowing I wouldn't be pushing a lot of watts.
Reply



All times are GMT -8. The time now is 03:41 AM.