Have the factory Alpine w/ sub system. Have the Axxess CHTO-013BB and ASWC-1 adapters attached together but not sure about the proper attachment of the remaining wires- red coming from the ASWC-1, yellow and black (ground) coming from the CHTO-013BB, and the blue coming from where the factory plug will attach to the CHTO. I'm installing a Kenwood DDX491. I'm assuming that all the other wires (ones attaching to the Kenwood harness from the CHTO) are just matching up colors. Any other guidance would be appreciated- first HU install.

 

I used the aswc-1 pre-prewired harness that came with the CTHO-013, and discarded the harness that came with the aswc. regarding the CTHO, just color match the wires to the wires on the Kenwood harness (red, blue, black, yellow).

Regarding awsc/kenwood, see page 7: http://contentdocs.installernet.com/...duct/34201.pdf

good luck!